Marvel Amada 15 HP 230V Three Phase 800 Series Manual Vertical Tilt-Frame Band Saw 800M VT7995M

FREE SHIPPING

Manufacturer Part: EMT ID:
VT7995M
13153

  • Touch Screen Control
  • Speed Range: 60-400FPM
  • ± 60 Degree Miter
  • Hydraulically Controlled Blade Tension
Details below

Specifications and Features

  • CAPACITY NOMINAL: 31.25" x 37.5", 31.25" Round
  • CAPACITY at 45° RIGHT: 31.25" x 25.5", 25.5" Round
  • CAPACITY at 45° LEFT: 31.25" x 24", 24.75" Round
  • CAPACITY at 60° RIGHT: 31.25" x 17.5", 17.5" Round
  • CAPACITY at 60° LEFT: 31.25" x 15.75", 16" Round
  • BLADE DRIVE: Electric with sensor-less vector control for smooth acceleration and full torque.
  • SPEED RANGE: Infinitely variable: 60 to 400 FPM, 15 H.P. Standard. Blade speed can be automatically set when material is selected.
  • TILTING COLUMN: For miter cutting up to 60° left and right of vertical. Variable speed, inverter driven, electronic tilt- Includes encoder feedback and touch screen display & control, for precision miter positioning. Electrically powered, chain driven, with encoder feedback and Amada Marvel PC3 controller.
  • TOUCH SCREEN CONTROL: Blade speed, feed pressure and angles are selected using the convenient, operator friendly touch screen control.
  • 3° CANTED COLUMN OR NON-CANTED COLUMN: Standard 3° forward approach angle for increased efficiency in cutting of structural materials.
  • FEED FORCE: Direct Force Sensing Electric Ball Screw Feed 0 - 350 lbs.; column travels on recirculating linear ball ways. Feed pressure can be automatically set when material is selected.
  • JAMMED BLADE PROTECTION: Automatically senses resistance as the column returns and stops to prevent blade damage.
  • BLADE: 25' Long x 2" Wide, .063". One Welded-Edge Band is furnished with each machine as part of standard start-up supplies.
  • BLADE GUIDES: Rotating Easy Load Combination Carbide and Ball Bearing Roller guides with self-tensioning design.
  • BLADE TENSION: Hydraulically controlled, 32,000 psi. max. Machine equipped automatic blade break/blade stall shut-off switch.
  • UPPER BLADE GUIDE ARM: Hydraulically positioned and locking, controlled by selector button on the touch screen.
  • VISES: Hydraulic, full stroking with 12" High x 20" Wide 60° faceplates. Optional variable vise pressure available as well as an optional second machine vise.
  • COOLANT SYSTEM: Built-in with Flood system, available with Drop Lubrication system, including chip pan with manual hand crank type chip conveyor. A Flushing hose is included to wash away chips from hard to reach places reducing clean-up time.
  • WORK-REST ROLLERS: Two turned ball bearing rollers, one on each side of the machine bed.
  • STANDARD MACHINE COLOR: Machine Tool Gray.
  • STANDARD LEFT-TO-RIGHT WORK ENTRY: Opposite Hand or Right-to-Left work entry available.
  • TABLE HEIGHT: 52"
  • MOTORS: Main Drive: 15 H.P. 1800 RPM, Coolant Pump: 1/2 H.P., Hydraulic Pump: 5 H.P. 1800 RPM
  • VOLTAGE: 230-3-60 Volt
  • CONTROLS: IEC fused disconnect switch and magnetic motor starters with overload and low-voltage protection. Power supply provides low voltage control to all push buttons at operator's control panel and machine lighting circuits. PLC control and drives mounted in moisture tight compartment with vibration isolation mountings. Electrical Equipment conforms to National Electrical Code NFPA 79. The Electrical Control Panel is U.L. Labeled.

Options

  • OPPOSITE HAND WORK ENTRY: Right-to-Left instead of Left-to-Right normally furnished.
  • POWERED CHIP CONVEYOR: Automatic motorized “scraper type” chip conveyor in place of standard manual chip conveyor. Includes drive motor with gear reduction and automatic shut off.
  • VARIABLE VISE PRESSURE CONTROL: Enables hydraulic pressure of work holding vises to be adjusted as required. Includes hydraulic pressure gauge and operator control.
Manufacturer
SKU
VT7995M
Shipping Method
LTL Freight
Weight
10,000 lb
Dimensions
150 × 94 × 132 in
Country of Origin
United States of America
Warranty
1 Year
(Parts)
There are currently no reviews for this product.
Be the first to review this product.
Looking for parts? Let us know what you need in the form, or give us a call at 281-241-9504
Marvel Amada 15 HP 230V Three Phase 800 Series Manual Vertical Tilt-Frame Band Saw 800M VT7995M
  • Marvel Amada 15 HP 230V Three Phase 800 Series Manual Vertical Tilt-Frame Band Saw 800M VT7995M at Elite Metal Tools
Request Sale Price
This product might qualify for a promotional price. Fill this out and we'll get a quote out to you right away!

Request Financing?

What is the Elite Advantage?

Free Shipping at Elite Metal Tools

Free Shipping

The Elite Metal Tools Promise!
Price Matching at Elite Metal Tools

Price Matching

The best prices on the web.
Customer Service at Elite Metal Tools

Customer Service

Our customers matter.
Knowledgeable Staff at Elite Metal Tools

Knowledgeable Staff

In our business, information is king.
Product Selection at Elite Metal Tools

Product Selection

Your one-stop-shop.