Marvel 10 HP 230V Three Phase Horizontal Post Style Band Saw PA22MPC

Specifications and Features

• Blade 2” L x .063” W x 21’8” H (50 x 1.6 x 6604 mm)
• Blade Tension: Hydraulically controlled tension (40,000 psi) provides consistent square cutting accuracy. The motion detector will shut the machine off should a blade break or stall.
• Speed Range: 60-300 feet per minute (18-90 meters per minute.) infinitely variable through a frequency inverter drive and heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. Read out at the operator’s touch screen assures accurate speed setting.
• Feed Force: Hydraulic feed pressure 0 - 300 lbs. (0 - 136 kg) infinitely variable. Feed rate and pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the best setting for the type of material being cut.
• Hydraulic Bar Feed: For automatic cutting, shuttle stroke is 16” (400 mm), multi-cycle feature provides for automatic cutting of pieces from 0 - 999” (0 - 25 m).
• Motors: Blade Drive: 10 H.P. (7.46 kW); Hydraulic Pump: 3 H.P. (2.25 kW); Coolant Pump Motor: 0.25 H.P. (.1875 kW).
• Voltage: 230V, 3 Phase, 60 Hz.
• MPC Programmable Control: Conveniently located on the operator’s control panel, this touch screen control allows the operator to program and store up to 100 jobs. Inputs include Part Length from 0 to 999” (25 m) (in inches up to 3 decimal places) and Number of Pieces to be cut. The Automatic Piece Counter stops each job when the pre-set number of cuts have been made. The control provides the option of running up to 20 parts in one job consecutively.
• Out-of-Stock Switch: The machine will shut off automatically when material is no longer present in the rear vise jaws.
• Blade Guides: Hydraulically controlled solid carbide guides are actuated when the machine’s hydraulic system is started to ensure rigid clamping for accurate cuts. Cast iron guide arms are manually positioned.
• Automatic Chip Conveyor: Electric drive auger-type automatic chip conveyor is a standard feature.
• Chip Brush: Powered from the main drive shaft of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance and blade life.
• Fast Approach: Work height is automatically set allowing the head to raise just enough to clear the work piece while reducing cycle time and improving cutting performance.
• Vice Jaws: Front vise jaws are split to hold material on both sides of the blade, reducing vibrations and burrs, and reducing remnants to as little as 6.5” (165 mm) (Jaw Height 11.25” (286 mm)).
• Variable Vise Pressure: Hydraulic clamping pressure to the work holding jaws can be adjusted as required to hold solid or thin wall material, allowing the piece to be held securely and without distortion.
• Work Light: Standard feature, mounted directly over work area.
• Hydraulic Capacity: 30 gal (114 L)
• Coolant Capacity: 32 gal (121 L)
• Table Height: 31.5”
• Table Weight Capacity: 7,500 lbs (7938 kg) and pull weight capacity
• Crated Machine Weight: 11,500 lbs (5216 kg)