Marvel Amada 10 HP 230V Three Phase 2000 Series PC3S Vertical Tilt-Frame Band Saw 2150A-PC3S-60 VT5063SW

FREE SHIPPING

Manufacturer Part: EMT ID:
VT5063SW
13137

  • Automatic Indexing
  • 10 HP High-Speed Bandsaw
  • Programmable Control
  • Servo Shuttle
Details below

Features

  • Automatic Servo Driven Index
    • Machine Tool Servo Technology is now available for the Series 2000 Marvel Vertical Bandsaw. Faster indexing and improved positioning controls provide for shuttle travel of 60FPM with improved accuracy while greatly reducing cycle times.
    • The heavy-duty shuttle conveyor also features a servo motor, a low backlash gearbox, a precision gear rack, and a direct drive encoder. This state-of-the-art index system also includes reduced remnant lengths through the use of offset vise jaws. To accommodate for crooked stock the rear jaws have also been made bi-directional.
    • Optional extended feed systems are available for 8, 13, and 18-foot lengths.
  • PC3 Programmable Control
    • User friendly full color touch screen control.
    • Graphical part programming & user-friendly interface.
    • Memory for up to 500 jobs and parts stored on removable media.
    • A customizable material library.
    • Blade speed, feed pressure and feed rate are automatically set either by material type or pre-programmed job.
    • Marvel’s “Bullet Nose” feature allows automatic cutting of complex multi-angle cuts. (Only available with PC3S model)
  • Cam Link Tilt Design
    • 60° cam link tilt design offers smooth, rapid, and accurate tilting for a wide array of cutting needs. 60 ft/min.
    • Standard features such as a 3° canted blade and direct blade drive provide consistent high production cutting.
    • The column travels on recirculating linear ball ways ensuring straight vibration free cutting.

Specifications

  • CAPACITY NOMINAL: 20" x 25", 20" Round
  • CAPACITY at 45°: 20" x 17", 17" Round
  • CAPACITY at 60°: 20" x 11.25", 11.25" Round
  • BLADE DRIVE: Electric with sensor-less vector control for smooth acceleration and full torque.
  • TILTING COLUMN: For miter cutting up to 60° left and right of vertical. Hydraulically powered cam link design includes built in protractor with Amada Marvel PC3 controller.
  • 3 DEGREE CANTED COLUMN: Standard 3° forward approach angle for increased efficiency in cutting of structural materials.
  • FEED FORCE: Direct Force Sensing Electrical Ball Screw Feed which combines more consistent feed force with greater control, 0 - 300 lbs, column travels on re-circulating linear ball ways. Feed pressure can be automatically set when material is selected, or adjusted manually using the PC3 touch screen.
  • BLADE GUIDES: Rotating Easy Load Combination Carbide and Ball Bearing Roller guides with self-tensioning design.
  • BLADE TENSION: Hydraulically controlled, 45,000 psi. max. Machine equipped with automatic blade break/blade stall shut-off switch.
  • UPPER BLADE GUIDE ARM: Hydraulically positioned locking, controlled using the PC3 touch screen
  • BLADE: 18' 2" (5537 mm) long x 1.5" (41 mm) wide, .05" (1.27 mm). One Welded-Edge Band is furnished with each machine as part of standard start-up supplies.
  • VISES: Hydraulic, full stroking with 9-12" high x 15" wide 60° face plates. Optional variable vise pressure available.
  • COOLANT SYSTEM: Build-in with flood system, available with Drop Lubrication system, including chip pan with chip removal ramp.
  • WORK-REST ROLLERS: Two turned ball bearing rollers, one on the entry side and one on the discharge side of the machine bed.
  • FLUSHING HOSE: Washes away chips from hard-to-get places reducing clean-up time.
  • AUTOMATIC BAR FEED: The Automatic Bar Feed design features a 48" stroke length with indexing speeds of up to 60 ft./min., and creep speeds of 33 in./min. The bar feed vise is servo driven with encoder feedback, and combines precision double ball screws with preloaded recirculating linear guides, resulting in positioning accuracy of ± .005" per index. The vise itself is hydraulically clamped to prevent material slippage. Optional outboard and second machine vises are available.
  • AMADA MARVEL PC3 PROGRAMMABLE CONTROL: Provides a Programmable Logic Control Unit with a 10" color, touch screen display. The control features graphical part programming with memor for up to 500 jobs and parts, as well as a material selection chart and customizable material library. both blade speed and feed force are automatically set according to material type for optimal cutting performance. Job programming consists of setting the cut-off length, angle and number of pieces to be cut. Additoinal features include Inch/Metric capability, out-of-stock shut down device, a fast cut job option and expanded memory storage using removable media. Also includes Jammed Blade Protection that senses resistance as the column returns and stops motion to prevent blade damage. Material can also be fed through the machine manually in both directions using the hydraulic.
  • STANDARD LEFT-TO-RIGHT WORK ENTRY: Opposite Hand or Right-to-Left work entry available.
  • MOTORS: Coolant Pump: 1/8 H.P., Hydraulic Pump: 5 H.P., Main Drive: 10 H.P.
  • VOLTAGE: 230-3-60 Volt
  • CONTROLS: IEC fused disconnect switch and magnetic motor starters with overload and low-voltage protection. Power supply provides low voltage control to all push buttons at operator's control panel and machine lighting circuits. PLC control and drives mounted in moisture-tight compartment with vibration isolation mountings. Electrical Equipment conforms to National Electrical Code NFPA 79. The Electrical Control Panel is U.L. Labeled.

Options

  • BULLET NOSE CUTTING: This optional feature allows automatic cutting of multiple angles on the end of an incoming work piece. The desired angles are easily programmed into the Marvel PC3S control using our intuitive graphical interface.
  • OPPOSITE HAND WORK ENTRY: Right-to-Left instead of Left-to-Right normally furnished.
  • MANUAL (HAND CRANK) CHIP CONVEYOR: Manually operated hand crank “scraper type” chip conveyor in place of standard chip ramp. Includes one chip box.
  • POWERED CHIP CONVEYOR: Automatic motorized “scraper type” chip conveyor, in place of standard chip ramp. Includes drive motor with gear reduction and automatic shut off.
  • VARIABLE VISE PRESSURE CONTROL: Enables hydraulic pressure of work holding vises to be adjusted as required. Includes hydraulic pressure gauge and operator control.
Manufacturer
SKU
VT5063SW
Shipping Method
LTL Freight
Weight
8,300 lb
Dimensions
117 × 89 × 95 in
Country of Origin
United States of America
Warranty
1 Year
(Parts)
There are currently no reviews for this product.
Be the first to review this product.
Looking for parts? Let us know what you need in the form, or give us a call at 281-241-9504
Marvel Amada 10 HP 230V Three Phase 2000 Series PC3S Vertical Tilt-Frame Band Saw 2150A-PC3S-60 VT5063SW
  • Marvel Amada 10 HP 230V Three Phase 2000 Series PC3S Vertical Tilt-Frame Band Saw 2150A-PC3S-60 VT5063SW at Elite Metal Tools
Request Sale Price
This product might qualify for a promotional price. Fill this out and we'll get a quote out to you right away!

Request Financing?

What is the Elite Advantage?

Free Shipping at Elite Metal Tools

Free Shipping

The Elite Metal Tools Promise!
Price Matching at Elite Metal Tools

Price Matching

The best prices on the web.
Customer Service at Elite Metal Tools

Customer Service

Our customers matter.
Knowledgeable Staff at Elite Metal Tools

Knowledgeable Staff

In our business, information is king.
Product Selection at Elite Metal Tools

Product Selection

Your one-stop-shop.