Jet J-A5816, 15" Variable Speed Floor Model Drill Press 115V1Ph 354550

These JET Drill Presses use a variable-speed motor with the stepped-pulley system, and come equipped with a continuously variable transmission. This enables use at a wide range of speeds, as well as the ability to change speed during operation. A scale-marked hand wheel that matches the desired machine speed is mounted to a reduction gearing system for precise operator control. This adjusts the gearing ratio between the motor's fixed pulley and the output shaft's variable pulley, changing the speed of the chuck. A tensioner pulley is implemented in the belt transmission to take up or release the slack in the belt as the speed changes.

• 1/2" Drill chuck and arbor included
• 3" column diameter for maximum head support
• 6" stroke for deep hole application
• Full bearing support on quill for maximum spindle stiffness
• Handwheel speed adjustment of 400 to 5,000 RPM
• Large 2-1/4" quill for greater accuracy

Specification	Value
Drills to Center of Circle (In.)	15
Spindle Travel (In.)	6
Style (Type)	Variable
Drilling Capacity Mild Steel (In.)	1/2
Drilling Capacity Cast Iron (In.)	5/8
Distance Column to Spindle (In.)	7-1/2
Table Size (L x W) (In.)	15 x 18
Spindle Distance to Base (In.)	44-1/2
Weight (Lbs.)	426
Spindle Distance to Table (Max.) (In.)	25-3/4
Spindle Taper (In. x TPI)	MT-2
Table Travel (In.)	16-3/4
Range of Spindle Speeds (RPM)	400 - 5,000
T-Slots Number and Size (In.)	2 and 1/2
T-Slot Centers (In.)	5-5/16
Work Table Weight Capacity (Lbs.)	90
Base Work Table (In.)	12-1/8 x 11-13/16
Column Diameter (In.)	3
Base Dimensions (In.)	20-7/16 x 14-3/16
Motor (HP)	1 HP, 115/230V, 1Ph
Overall Dimensions (L x W x H) (In.)	30 x 20 x 71
Height	67.5000
Length	31.5000
Weight	388.0000
Width	21.5000