Manufacturer Part: | EMT ID: |
DS220MK2
|
15076
|
- Drill Diameter: 1/16” – 3/4”
- Point Angle: 60 °- 170°
- Power Supply: AC 110V 50/60Hz
- RPM of Motor: 5300 RPM
Description
The DS220MK2 Drill Sharpener provides a valuable return on investment to any shop with dull drill bits. Adding this sharpener to your shop will immediately decrease your spending on new tools. The DS220MK2 Drill Sharpener is easy to use, has a small foot print and a heavy-duty construction for industrial tool sharpening. It allows you to create center cutting end geometry so that a pilot hole is not needed.
These drill grinders are not the look-alike grinders that can be found on eBay and Alibaba. Cuttermasters’ grinders are tested in North America, CE approved, and covered by Cuttermasters’ manufacturer’s warrantee. The wheels are the bottom line. If the wheels are no good, the machine is no good. Cuttermasters’ wheels are produced using General Electric abrasive media under strict conditions to ensure long life and, in some cases, are designed by Cuttermasters in North America.
Features
- Precision assurance within 0.02mm (0.0005 inch)
- Creates center cutting geometry
- High accuracy balance of tip geometry
- Easy to operate
- High accuracy steel alloy collets
- High-efficiency DC motor
- Industrial quality GE grinding wheel
- Portable
- Easy and perfect ends with back split
- 60° - 170° point angle
- Includes ER20, 25 collet set
- Includes tool storage onboard
- Grinds several point geometries
- Expandable to 1" 2021
- DS220 MK2 Grinds drills 2mm to 20mm (1/16” to 3/4”) diameter
- Creates 82-175° tip angles in several geometries with full back-split
- Creates variable split point geometry
- Grinds both High Speed Steel and Carbide
- Solid Steel construction with built-in tool storage drawer
- Machine size: 26cm x 16cm x 19cm x 8kg
- Advanced 1A1 Wheels common both sides allows for wider faces and reduced wheel cost
Specifications
- Drill Diameter: 1/16” – 3/4”
- Point Angle: 60 °- 170°
- Power Supply: AC 110V 50/60Hz
- RPM of Motor: 5300 RPM
- Grinding Wheel: Single wheel is used; choose CBN (DS-C200) for steel or diamond (DS-D200) for carbide. An additional CBN flat, Enhanced Life wheel is provided (DS-C200EL).
- Net Weight: 8kg
- Gross Weight: 9kg
- Machine Size (L x W x H): 28.6cm x 13.3cm x 15.5cm
- Packing Size (L x W x H): 31.5cm x 14.0cm x 16.5cm
- Type of Thinning: X Thinning
- Standard Accessories: ER20 and 25 collet set
Options
- Diamond Wheel for Carbide Drills (DS-D200, DS-D200F) or CBN for steel (DS-C200)
- Expansion to 5/8” ER25 Collet Chuck and 14, 15mm collet
- AC 220V Power Supply
Manufacturer | |
SKU |
DS220MK2
|
Shipping Method |
Ground
|
Weight |
35 lb
|
Dimensions |
16 × 11 × 15 in
|
Country of Origin |
Taiwan
|
Warranty |
1 Year
1 Year
|