Betenbender 208V Three Phase 1/8" Hydraulic Shear 10' Bed

FREE SHIPPING

Manufacturer Part: EMT ID:
BB18S10 (208V)
432

  • All Steel Construction
  • NEMA Electrics
  • Motor: 10 hp, 208 Volt, 3 Phase
  • Made in the USA
Details below

Description

A precision cut doesn't happen by chance.

It takes a shear that can make a razor-sharp cut time after time. Betenbender overdriven and underdriven Hydraulic Shears are designed to do exactly that.

Betenbender designs simplicity and safety into its shears-with an advanced hydraulic system, and flexible operation. They're easy to operate, easy to maintain and able to withstand the rigors of today's production demands. A wide range of options are available.

Features

  • Controls: Push button and switch controls are at your fingertips. The fully guarded, 2-position 110v footswitch lets you interrupt the cutting stroke at any point in its cycle.
  • Easy Material Handling: A sturdy backgauge and rake angle adjustment minimizes twist and distortion. This makes it possible to increase the rake for cutting heavier stock and extend maximum capacity of the machine. A 4' squaring arm with a recessed scale makes for fast, easy measurement.
  • Single Piece Top and Bottom, High Carbon, High Chrome Shock Resistant Knives: Provide four separate edges for clean cuts and long blade life. Easy blade gap adjustment means precise cuts for a wide variety of materials.
  • Electrical System: Meets NFPA 79 and construction requirements of the ANSI B11.4. All machines have disconnect switches magnetic starters, 110/120v controls, and 208-230/460v 3 phase, others optional.
  • Backgauges: A Betenbender Shear is capable of shearing 1/8" (10 GA) material to the following tolerance: Dimension - The width of the off-cut portion of the workpiece is within ±0.005 inch of the backgauge setting.

Specifications

  • Knives: 1x3
  • Motor: 10 hp, 208 Volt, Three Phase
  • Weight (May Vary): 9,100 lbs
  • Overall Length: 145"
  • Overall Height: 55"
  • Table Height: 32"
  • Anchor Bolt Dimension/Length: 124"
  • Anchor Bolt Dimension/Width: 36"
  • End Plate Width: 30"
  • Machine with Backgauge: 74"
  • Squaring Arm Length, 4' Std: 30"
  • Knife Length: 114"
  • Rake Angle per Rated Capacity: 1/4"
  • Strokes per Minute: 30"
  • Number of Hold-down Pins: 19"
  • 36" Power Backgauge with LED Readout Inch / Metric.
  • 4' Squaring Arm with Inlaid Scale
  • All Hydraulic Fluids Included
  • All Steel Construction
  • American Made Hoses and Fittings
  • American Made Motor and Valves
  • Disconnect Switch
  • Hour Meter
  • Hydraulic Pressure: 2500 psi
  • Hydraulic Self-Compensating Hold-down Bar Assembly
  • Light Beam Gauge (Shadow Line)
  • Linemaster Foot Switch
  • Manual Rapid Blade Gap Adjustment (3/8" and Larger)
  • Manual Swing up Backgauge
  • NEMA Electrics
  • Power Adjust Variable Rake
  • Safety Switch for Front Guard
  • Single Piece Top and Bottom, Shock Resistant Knives with Four Cutting Edges

Available Options

  • Recommended options for 3/8", 1/2", 5/8" and 3/4" machines:
    • 3 Position Power Blade Gap Adjustment (3/8" and Larger)
    • Automatic Power Lift Backguage
  • Recommended options for all machines:
    • 48" Support Arms/Front Gauges
    • Neoprene Hold-down Caps
    • One Shot Lubrication
    • Solid Table Top - Bolt on Segments
  • 2 Position Power Blade Gap Adjustment (3/8" and Larger)
  • 208v Single Phase
  • 5 Station NC "GO-TO" Positioner
  • Angle Gauge
  • Automatic Lubrication
  • Ball Transfers
  • Bolt/Shim Kit for Leveling
  • Continuous Stroke (Includes Stroke Counter)
  • Disappearing Stops (Support Arms)
  • Dovetail Slots or T-Slots
  • Electronic Stroke Control
  • Extended Squaring Arm (4' Standard)
  • Extra Foot Pedal with Keylock Switch
  • Flip Up Stops (Squaring Arm)
  • Harder Grade of High Carbon, High Chrome Knives
  • Increase HP (Increase Speed)
  • Independent Hold-down Control
  • Inlaid Scale (0-48")
  • Keylock Switch
  • Left Hand Squaring Arm (4')
  • Machined Solid Table Top Bed
  • Oil Cooler
  • Other Electrics and Motors
  • Pneumatic Sheet Support
  • Power Blade Gap Adjustment (10 GA, 3/16", 1/4")
  • Special Paint Colors
  • Stroke Counter
  • Extra Length on Backgauge
  • Power Lift Backguage
Manufacturer
SKU
BB18S10 (208V)
Shipping Method
Flatbed
Weight
9,100 lb
Dimensions
156 × 104 × 55 in
Country of Origin
United States of America
Warranty
1 Year
(Parts)
There are currently no reviews for this product.
Be the first to review this product.
Looking for parts? Let us know what you need in the form, or give us a call at 281-241-9504
Betenbender 208V Three Phase 1/8" Hydraulic Shear 10' Bed
  • Betenbender 208V Three Phase 1/8" Hydraulic Shear 10' Bed at Elite Metal Tools
Request a Quote
You're so close! To get the best price, we need a little information from you first.

Request Financing?

What is the Elite Advantage?

Free Shipping at Elite Metal Tools

Free Shipping

The Elite Metal Tools Promise!
Price Matching at Elite Metal Tools

Price Matching

The best prices on the web.
Customer Service at Elite Metal Tools

Customer Service

Our customers matter.
Knowledgeable Staff at Elite Metal Tools

Knowledgeable Staff

In our business, information is king.
Product Selection at Elite Metal Tools

Product Selection

Your one-stop-shop.