Baileigh CNC Wood Router Table WR-105V-ATC

Description

This CNC router table can automatically change tooling in just 8 seconds. You can program profile switches right into your design to save time and maintain precision during industrial production runs.

• Large 5’ x 10’table.
• Arrives pre-built with correct alignment. No complicated set-up process.
• Comes with softwarefor plotting out designs on your computer, then turning them into cut patterns for the machine.
• Runs on 220-volt 3-phasepower.
• Powerful 12hp spindlecan tackle hard materials without flinching.
• 9 kilowatt air-cooled spindlewill stay accurate through years of production.
• Variable spindle speed, from 0 to 24,000 rpm.
• Servo motorsensure smooth running at both fast and slow speeds.
• High gantry is up and away from material, allowing you to see what it’s doing.
• Y axis moves far enough for the gantry to clear the table. You can take the material directly off; no need slant it awkwardly.
• Upload your design to the table with a USB drive. Automatic tooling changes let you swap out bits with computer-controlled precision. Sensor compensates for the change in tool lengths. That change might seem tiny, but it makes a huge difference to the finished product.
• Pre-load up to 6 collets with your chosen profiles; the router will switch between them as programmed.
• Powerful 7hp vacuum in the bed of the table holds the material in place during the cutting process. 
• 4 vacuum zonesallow you to turn on the valve only for the area where you’re working.
• Arrange each zone’s vacuum sealinto the shape of the material to provide well-distributed suction.
• Dust shroudfits over the spindle; you can vacuum out all the dust and chips while you’re cutting.
• Fully-welded steel framekeeps the machine stable, helping the router last longer and preventing vibrations from taking the cut off-course.
• Covered by a 1-year parts warranty.
• You can count on lifetime technical support by phone from Baileigh’s team of reps, all with hands-on product experience.

BOBCAD-CAM EXPRESS DESIGN SOFTWARE (INCLUDED)

The WR-48 comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the table via a USB drive.  To learn more or download a free trial, click the BobCAD-Cam logo above.

Specifications

• Item Number WR-105V-ATC
• Actual Working Area 118" x 59"
• Speeds Variable
• Spindle Air Cooled
• RPM 0-24000
• Z Axis Stroke 8"
• Maximum Moving Speed (Inches Per Minute) 2362
• Maximum Engraving Speed (Inches Per Minute) 984
• Reposition Accuracy 0.0015
• Tool Diameters er32
• Power 220V Three Phase
• Length 140"
• Width 110"
• Height 89"
• Horse Power 12
• Weight (lbs) 3200
• Table Style Vacuum