Adwood OPTIM Series 220V 1.88HP Three Phase Edgebander OPTIM

Description

The OPTIM Series is the most compact sized edgebander in the market, providing high performance at a very competitive price. Requiring minimum space, the new CEHISA Series can be equipped with interchangeable DIA cutters pre-milling unit, DUOMELT® Gluepot for the use of both EVA and PUR hotmelt adhesives, industrial drag chain, motorized pressure beam with prismatic guides, cleaning and/or release agent spray, and color touch screen.

Features

• FEEDING STATION
  • Tray for the roll of edgebanding
  • Timer controlled automatic feeding allowing the precise adjustment of the in-feed
  • Surplus and minimizing the waste of edging material
  • Pneumatic pre-cutting guillotine (up to 3 mm PVC/ABS edges thickness)
  • Feeding tray with non-return tape system
• GLUE APPLICATION UNIT M2-NS
  • New design with improved thermodynamics, granting a shorter heating time with less power consumption (2.5kW); Full TEFLON® coating of the whole assembly
  • Injection of melted glue at the upper and lower points of the application roller where heating elements are built in to maintain optimum working temperature
  • Automatic temperature control by electronic thermostat preventing the scorching of glue when the machine is idle; 1.5 kg capacity glue tank
  • New glue regulating gate
• PRESSURE ROLLERS
  • A group of 2 rollers exerting pressure on the edge band in order to achieve its adhesion onto the panel edge
• ENDTRIMMING V-1
  • Single support / single carriage / single through shaft HF motor (0.27 kW / 12000 RPM) with one milling head, performing the front and the rear trim cut cycles
  • Soft and precise movement of the carriage
  • Tooling: 4 TCT interchangeable straight knives cutter head set ø72 x 25
  • New dust collector system
• T & B TRIMMING UNIT JC-1
  • 2 separate units for machining excess edgebanding along the upper and the lower edges of the panel
  • Two HF motors of 0.27 kW / 12000 RPM with milling cutter heads with TC inserts
  • Tooling: milling cutters with TC changeable blades set ø65 x 20 x 20 Z4 R2

Specifications

• Edgebanding material (Melamine/PVC/ABS/PP/veneer): 0.4 - 2mm (3mm opt.)
• Panel
  • Thickness: 8 – 50 mm
  • Length: 200 – unlimited mm
  • Width: 75 – unlimited mm
• Feed speed: 5.5m/min (18 ft/min)
• Working air pressure: 6 - 7 kg/cm²
• Total electrical output: 1.4 kW (1.88 HP)
• Electrical connection: 3-Phase, 220V / 60Hz
• Dimensions installed: 2352mm x 1190mm x 1444mm (93” x 47” x 57”)
• Net weight: 620 kg (1,367 lbs.)
• Requirements
  • Electrical connection: 220 volt, 3-phase, 60 Hz
  • Amperage: 10 amps
  • Dust extraction: 4¾” outlet @ 1200 cfm
  • Compressed air connection: 5 cfm @ 90 psi

Options

• Start-up Service
• Glue Scraper RR-8
  • Designed to remove possible residue of glue on the top and bottom surfaces of the panel
  • Two floating blade holders with independently adjustable vertical copying devices
  • Air blow nozzles for tracer cleaning
  • Manual positioning of the station in ON/OFF position
• Buffing Unit PC-3
  • Designed to remove possible residue of glue
  • Restore the PVC/ABS edge color and polish it after trimming and scraping operations
  • 2 independent units with tilting motors (2 x 0.09 kW / 14000 RPM)
  • Tooling: cotton discs ø100 mm