Bench Top Lathes

  • 10.75" Swing Over Bed 
  • Distance Between Centers 30" 
  • 60 Hz with Inverter 
  • 622 lbs 
  • Swing over bed: 10-1/2"
  • Motor: 1 HP, 110V, single-phase
  • Number of speeds: 6
  • Maximum tool size: 1/2" x 1/2"
  • Swing over: bed 8-1/4", cross slide 4-5/8"
  • Distance between centers: 15-3/4"
  • Spindle: bore 0.787" (20mm), taper MT#3
  • Motor: 600W (3/4 HP), 110V, DC, 10A
  • Bed width: 7-1/4"
  • Spindle bore: 1.417" (36mm)
  • Compound travel: 3-1/4"
  • Motor: 2 HP, single-phase, 220 Volt
  • Swing over bed: 9-1/2"
  • Swing over cross slide: 6-1/8"
  • Motor: 1 HP, 110V, Single-phase
  • Maximum tool size: 1/2"
  • Swing over: bed 8-1/4", cross slide 4-5/8"
  • Distance between centers: 15-3/4"
  • Motor: 600W (3/4 HP), 110V, DC, 10A
  • Spindle speed ranges: Low 50–1000, High 100–2000 RPM
  • Motor: 3/4 HP / 115 V / 60HZ / 1PH
  • Center Height: 3.54 in
  • Distance Between Centers: 11.81 in
  • Turning Diameter: 7.09 in
  • Power Requirement: 440V, 3-Phase, 60 Hz
  • Spindle Speeds: 20 – 2500
  • Number of Longitudinal Feeds: 17
  • Shipping demensions: L90" x W41" x H75"

 

  • 6" x 10"
  • Swing over bed: 6"
  • Distance between centers: 10"
  • Spindle bore: 3/8"
  • 9" x 19"
  • 130 - 2,000 RPM
  • 110V
  • Single-Phase 
$1,816.75
$1,544.99
Save $271.76!
  • 10" x 26"
  • 110V
  • 1" Spindle Bore
  • Six speed lathe 
$2,425
$2,055
Save $370!
  • Motor: 1 HP / 115 V / 60HZ / 1PH
  • Center Height: 5.51 in
  • Max Turning Diameter: 11.02 in
  • Distance Between Centers: 27.56 in
$4,835
$4,130
Save $705!
  • Lathe Motor: 1PH - 115V - 13.6 Amps - 1PH - 60 Hz
  • Height of Centers: 4-3/4"
  • Max Turning Diameter: 9-7/8"
  • Distance Between Centers: 20"
$4,552
$3,795
Save $757!
  • Motor: 5/8HP - 115V - 1PH - 60Hz
  • Swing Over Bed: 5-1/2"
  • Distance Between Centers: 9-3/4"
  • Spindle Speed: 160 - 4000 RPM
$1,655
$1,490
Save $165!
  • Swing Over Bed: 25.98” (660mm)
  • Swing Over Cross-Slide: 16.53” (420mm)
  • Swing Over Gap: 34.25” (870mm)
  • Gap Length: 9.44” (240mm)
  • Variable Speed Bench Top Lathe
  • Precision Ground And Hardened Ways
  • 3 Jaw and 4 Jaw Chuck
  • Steady And Follow Rests
  • Variable Speed Bench Top Lathe
  • Precision Ground And Hardened Ways
  • 3 And 4 Chuck
  • Steady And Follow Rests
  • Spindle Speeds 25-1800 rpm
  • Longitudinal Feed Imperial (qty / type) 122 / .0015"-.0913" / rev.
  • Speed Number 12
  • Spindle Bore 3.125"
  • Swing Over Bed: 19.7” (500mm)
  • Swing Over Cross-Slide: 11.8” (300mm)
  • Swing Over Gap: 28” (710mm)
  • Gap Length: 9.44” (240mm)
  • Motor: 1HP - 115V - 1PH - 60Hz
  • Swing Over Bed: 10"
  • Distance Between Centers: 21-5/8"
  • Number of Spindle Speeds: 6
$3,448
$3,050
Save $398!
  • Motor: 1 HP / 115 V / 60HZ / 1PH
  • Center Height: 4.92 in
  • Distance Between Centers: 21.65 in
  • Turning Diameter: 9.84 in
$2,513
$2,350
Save $163!
  • Spindle Nose Diameter: Ø55.5mm (Ø2-3/16")
  • Spindle Speeds (Variable): 0-4000 R.P.M.
  • Swing Over Bed: 280mm (11")
  • Distance Between Centers: 457mm(18")
  • Swing Over Bed: 19.7” (500mm)
  • Swing Over Cross-Slide: 11.8” (300mm)
  • Swing Over Gap: 28” (710mm)
  • Gap Length: 9.44” (240mm)
  • Swing over bed: 9-1/2"
  • Motor: 1 HP, 110V, 12A
  • Spindle speed range: Variable, 100–2000 RPM
  • Maximum tool size: 1/2"