Radial Arm Drills

  • Drilling Capacity: 2"
  • Spindle Travel: 12.4"
  • Spindle Speeds: 25 to 2500 RPM
  • Morse Taper 5 Spindle
  • Drilling Capacity: 1.5"
  • Spindle Travel: 9.4"
  • Spindle To Base: 4.72" to 33.85"
  • Morse Taper 4 Spindle
  • Drilling Capacity: 2"
  • Spindle Travel: 12.4"
  • Spindle Feeds: .0016" to .126"
  • Morse Taper 5 Spindle
  • Max. Drill Capacity: 2-1/2" (No.45 steel) & 2-7/8" (HT200 cast iron)
  • Max. Tapping Capacity: 1-3/4" (No.45 steel) & 2" (HT200 cast iron)
  • Distance from Spindle to Column Center: 13-3/4" to 63"
  • Diameter of Column: 13.7"
$46,968.57
$38,689.00
  • 2" maximum drilling capacity
  • Heavy duty construction
  • Power down feed
  • Large 63" column
$31,102.86
$25,625.00
  • 1.57" maximum drilling capacity
  • Heavy duty construction
  • Power down feed
  • 39.3" reach
$16,170.00
$13,325.00
  • Drilling depth (max.): 20”
  • Motor rating main drive : 20.1 Hp
  • Drilling capacity : 3.94”
  • Speed range: 8 rpm - 1000 rpm
  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • Powerful 5 Hp, 2-speed, heavy-duty spindle drive motor
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
    Coolant system
  • CSA Electrics Standard
  • Drilling capacity: 2.36”
  • Drilling depth (max.): 12”
  • Speed range: 38 rpm - 2000 rpm
  • Motor rating main drive: 5.4 Hp
  • Drilling depth (max.): 12”
  • Drilling capacity: 2.44”
  • Motor rating main drive: 5.4 Hp
  • Speed range: 38 rpm - 2000 rpm
  • Drilling capacity: 1.97”
  • Table set up area: 47” x 20”
  • Tapping capacity, steel: M 32 null
  • Throat: 25”
  • Powerful 2 Hp spindle drive motor for heavy-duty cutting
  • Special spindle balance mechanism, superior to traditional balance mechanism and extends Balance Spring life
  • Coolant system
  • Low volt and overload protection
  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • Powerful 5 Hp, 2-speed, heavy-duty spindle drive motor
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
  • CSA Electrics Standard
  • Drilling Capacity: 1.26”
  • Column Diameter: 8”
  • Throat: 13” – 32”
  • Spindle nose-to-table surface distance: 13” – 34”
  • High speed gears are made of Nickel-Chrome Steel and are heat-treated and ground for durability
  • Extra auxiliary dial for spindle feed depth indication, allows review of spindle feed depth, .0394" to 7.874"
  • Special spindle balance mechanism, superior to traditional balance mechanism and extends Balance Spring life
    Coolant system
  • CSA Electrics Standard
  • Drilling Capacity Steel: 1 1/2"
  • Drilling Capacity Cast Iron: 2"
  • Spindle Stroke: 7 7/8"
  • Spindle Speed (# Steps): (6) 88~1500RPM
  • Drilling depth (max.): 16”
  • Drilling capacity : 3.15”
  • Speed range: 30 rpm – 1400 rpm
  • Motor rating main drive : 10.1 Hp
  • High Column 
  • Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear
  • Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
  • Powerful 3 HP spindle drive motor for heavy duty cutting
  • High speed gears
  • Low volt and overload protection
  • Tool kit & manuals
  • Diameter to Column: 22”
  • Head Travel: 79”
  • Column to Spindle: 98”
  • Motor: 220V, 10 HP
  • Diameter to Column: 22”
  • Head Travel: 79”
  • Column to Spindle: 98”
  • Motor: 440V, 10 HP
  • 2HP spindle drive motor for heavy duty cutting
  • High speed gears are made of nickel-chrome steel and are heat treated and ground for durability
  • Coolant system
  • Low volt & overload protection
  • Drilling Capacity Steel: 2"
  • Drilling Capacity Cast Iron: 2 3/8"
  • Spindle Feeds: 0.02~0.006 IPR
  • Spindle Diameter: 3 1/16"
  • Drilling Steel: 2 9/16"
  • Drilling Cast Iron: 2 3/4"
  • Spindle Taper: MT #5
  • Spindle Travel: 44 7/8"