Auxiliary Machine

  • Weight: 35 lbs
  • Dimensions: 26 x 16 x 12 in
  • Capacity: 24 Ga Mild Steel
  • UPS: UPS Capable
  • Capacity: T-D-P 18-24 ga
  • Motor: 10HP 220V Three Phase 
  • Forming Speed: 50 FPM
  • Produces either TDC or TDF flanges 
  • Capacity: 24 gauge mild steel 
  • Motor: 1/2 HP / 115V / Single Phase
  • Speed: Approx 35 FPM 
  • Flange Height: 3/16"
  • Capacity: 24 GA. MAX. Mild Steel
  • Capacity: 28 GA. MIN. Mild Steel
  • Approx. Speed: 35 FPM
  • 1/2 H.P. electric motor, single phase
  • Capacity: 20-26 Gauge Mild Steel
  • Depth of Pocket: 5/16″ 
  • Speed: Approx. 25 FPM
  • Motor: 1 HP, 230V
  • Capacity: 20-26 Gauge Mild Steel
  • Depth of Pocket: 5/16″ 
  • Speed: Approx. 25 FPM
  • Motor: 1 HP, 115V
  • Production Speed: 30 ft/min Nominal
  • Dimensions (LxWxH): 16 ½” x 12” x 15” 
  • Line Voltage: 110 VAC
  • Unit includes base assembly, 110 VAC power unit, and one set of tooling
  • Capacity: 20 Ga. x 7/32″
  • Minimum Radius: 1 3/4″
  • Weight: 35 lbs
  • UPS: UPS Capable
  • Capacity: 24 gauge mild steel 
  • Motor: 1/2 HP / 115V / Single Phase
  • Speed: Approx 35 FPM 
  • Depth of Pocket: Approx 5/16" with hammer edge of 3/8"
  • Capacity: 20-26 gauge 
  • Motor: 3 HP / 220V / Three Phase / 60 Hz
  • Speed: Approx. 60 FPM
  • 9 Station button lock rollformer
  • Capacity: 22-28 Ga
  • Motor: 5HP 230V Three Phase
  • Speed: 90 FPM
  • Dimensions: 69 x 29 x 49 in
  • Stud/Track Web Sizes: 1.63, 2.50, 3.63, 4.00, 6.00-in
  • Max Strip Width: 17.00in
  • 10 roll forming stations
  • 1 Adjustment Station & 1 Pull-Out Station
  • Cleat Width: 1-1/16"
  • Drive Cleat Width: 1-1/8"
  • Motor: 5HP 230V Three Phase
  • Speed: 100 FPM
  • Capacity: 24-30 Gauge 
  • Speed:  30ft./minute
  • Uses either 3″ or 6″ width blanks 
  • Works with collars 3″ to 14″ in diameter out of 24 to 30 gauge galvanized
  • Stud/Track Web Sizes: 3.50, 3.63, 4.00, 5.50, 6.00, 8.00-in
  • Max Strip Width: 14.00in
  • 10 roll forming stations
  • 1 Adjustment Station & 1 Pull-Out Station
  • Stud/Track Web Sizes: 3.63, 4.00, 6.00, 8.00, 10.00, 12.00in
  • Max Strip Width: 17.00in
  • 10 Roll forming stations
  • 1 Adjustment Station & 1 Pull-Out Station
  • Speed: 90 feet per minute
  • Motor: 5 HP 230V Three Phase 
  • Drive: Matched Double Vee Belt
  • Feed table height: 34 5/8”
  • Speed: 90 feet per minute
  • Motor: 5 HP 460V Three Phase 
  • Drive: Matched Double Vee Belt
  • Feed table height: 34 5/8”
  • Motor: 5HP 220V Three Phase
  • Line Speed: 50 FPM
  • Gauge Capacity: 20-26 Ga
  • 24” Full Hardened Tool Steel Guides
  • Capacity: 16 Gauge Aluminum, Copper, and Brass 
  • Motor: 3/4 HP, 110V, Single Phase 
  • Speed: approx 18' per minute 
  • UPS Capable 
  • Capacity: 22-28 Ga. galvanized mild steel 
  • Width of S-Cleat: 1-1/16" 
  • Width of Drive Cleat: 1-1/8" 
  • Motor: 1.5HP / 110V / Single Phase 
  • Capacity: 20 GA. MAX. Mild Steel
  • Capacity: 26 GA. MIN. Mild Steel
  • Approx. Speed: 25 FPM
  • 1 HP electric motor, 110-115V single phase
  • Capacity: 16-20 Ga.
  • Motor: 3HP / 230V / Three Phase
  • Depth of pocket size: ½” width of hammer-over edge adjustable up to 3/8
  • Speed: 40-45 ft per minute
  • Capacity: 20-24 Gauge Mild Steel
  • Flange Right Angle: 7/32”
  • Heavy Duty Cabinet
  • Illuminated Power Switch