Grinding & Sanding

  • Brake Resistor added for rapid wheel stoppage
  • CSA/CUS Certified
  • Totally enclosed, pre-lubricated ball bearings
  • Variable speed provides wide range of RPMs
  • *LED Work Lamp shown not included
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Metalworking-specific outer filter that attracts more oil mist, smoke and dust generated during the metal processing, which could effect the health of the machinist, especially in closed areas of the workshop
$2,920.00
$2,429.00
  • Variable Speed: 170-1725 RPM
  • Up to 9,000 SFPM disc speed
  • Forward / Reversing switch
  • Motor: 3 HP 220V Three Phase
$11,439.00
$10,313.76
On Sale
Laguna Tools Enduro MW37 Pro 37” 20HP 220V Three Phase Metal Wide Belt Sander MSANWB37X75-1K-20-0197-1 at Elite Metal Tools
  • Belt Size: 37″ x 75″
  • Sanding Drum: 1720 RPM
  • Max Sanding Width: 36 1/2"
  • Motor: 20HP, 220V, Three Phase
  • Belt Size: 37″ x 75″
  • Sanding Drum: 1720 RPM
  • Max Sanding Width: 36 1/2"
  • Motor: 10HP, 220V, Single Phase
  • IN STOCK READY TO SHIP!!!
  • Tilt table- vertical sander only
  • 1" x 42" belt
  • 4" drive wheel
  • 1800 SFPM

 

 

$426.00
On Sale
Laguna Tools Compact Enduro MW37C 37” MWC 10HP 220V Single Phase Metal Wide Belt Sander MSANWB37X60-1K-10-0197-1 at Elite Metal Tools
  • Belt Size: 37″ x 60″
  • Max Sanding Height: 6”
  • Max Sanding Width: 36 1/2”
  • Motor: 10HP, 220V Single Phase
  • Fixed Speed: 7200 SFPM
  • Contact Wheel Size: 8” x 3"
  • Elevation Control Option Included
  • Motor: 3 HP 220V Three Phase
$7,025.00
$6,478.37
  • Reduced Grinding Time
  • Dependable and Safe
  • Low Noise Level
  • Motor: 1 HP Special Duty, 3450 rpm, 60 Hz, 110 Volt
  • Fixed Speed: 5400 SFPM
  • Easy disc change with unique swing away feature
  • Forward / Reversing switch
  • Motor: 1.5 HP 120V Single Phase
$2,524.00
$2,280.90
  • 2HP Motor 
  • Disc Diameter 20"
  • Disc Speed 1100rpm
  • 220V/1-phase Power 
$2,850.00
$2,355.00
  • Reduced Grinding Time
  • Dependable and Safe
  • Low Noise Level
  • Motor: 1 HP Special Duty, 3450 rpm, 60 Hz, 220 Volt
  • Steel platen 14-1/2″ x 36″
  • Air tension on belt, 0-55 PSI reqd.
  • 20 HP, 3 PH TEFC
  • Dimensions: L 64″ x W 31″ x H 35″
  • Type of Operation: Electric Reciprocation and Electric Crossfeed
  • Table/Cross Travel Max: 18” x 7”
  • Grinding Wheel Supplied: 7” x 1/2” x 1.25” hole
  • Spindle RPM: 3360
  • CSA/CUS Certified
  • Industrial strength construction for demanding usage
  • Innovative safety guarding surrounding the sanding belt
  • Large Eye Safety Shields
  • Rubber sealed bearings for years of maintenance free sanding on idle wheel
$1,097.14
$942.00
  • 2" x 48" Belt Grinder
  • 1/2HP Motor
  • 7225 SFPM
  • Multi-Position Grinder From Vertical to Horizontal
$1,295.00
$1,176.00
  • Center height: 5”
  • Grinding length: 31”
  • Grinding diameter: 0.3” - 7.9”
  • Inside grinding depth: 4.9”
  • Included 100 grit belt and 80 grit disc
  • Fits almost any bench grinder with a 1/2 or 5/8 shaft
  • Underside offers a slack belt surface
  • #1 selling product in grinder attachment market
$245.00
On Sale
Laguna Tools Compact Enduro MW25C 25” 75HP 220V Single Phase Metal Wide Belt Sander MSANWB25X60-1K-7.5-0197-1 at Elite Metal Tools
  • Belt Size: 25″ x 60″
  • Max Sanding Width: 24 3/4″
  • Max Sanding Height: 6”
  • Motor: 7.5HP, 220V, Single Phase
  • CSA/US: Following strict guidelines and electrical requirements, this JET Industrial Dust Collector is CSA/US certified
  • Simple and easy to clean-out chip & dust drawer
  • Easy to change exhaust filter
  • All steel construction
  • Non-sparking aluminum housing and fan blade
$3,595.71
$2,989.00
  • 59" x 22" Downdraft Table
  • Dual Motors
  • 1790 CFM Per Motor
  • 110V
$4,542.86
$3,749.00
  • CSA/US: Following strict guidelines and electrical requirements, this JET Industrial Dust Collector is CSA/US certified
  • Simple and easy to clean-out chip & dust drawer
  • Easy to change exhaust filter
  • All steel construction
  • Non-sparking aluminum housing and fan blade
  • Variable Speed: 500-5300 SFPM
  • Contact Wheel Size: 7 x 4"
  • Pedestal Included
  • Motor: 1 HP 120V Single Phase
$5,915.00
$5,308.15
  • 4.5 Cubic Feet capacity
  • Motor: 1-1/2 HP 120V Single Phase
  • Max Length Part: 34”
  • Comes with Process Timer
$8,900.00
$8,119.10