Floor Drill Presses

  • Drilling capacity in steel: up to 1.26" (32mm) maximum
  • Drilling capacity in cast iron: up to 1.38" (35mm) maximum
  • Built-in low voltage electrical equipment in machine head
  • Drill guard with microswitch
  • 1.5HP Motor 
  • 5/8" Tapping Capacity 
  • 1" Drill Capacity 
  • 5.3" Spindle Travel 
$5,772.86
$4,699.00
  • Tapping capacity in steel: up to 1.30" (33mm) maximum
  • Tapping capacity in cast iron: up to 1.54" (39mm) maximum
  • Machine base with 2 T-slots, coolant tank and pump
  • Built-in low voltage electrical equipment in machine head
  • Main motor rating: 2 HP
  • Drilling capacity in steel/ST37: 2”
  • Table load capacity (max): 220 lbs
  • Throat: 11”
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • 3 head drill press
$44,185.00
$42,995.00
  • Drilling capacity in steel: up to 1.26" (32mm) maximum
  • Drilling capacity in cast iron: up to 1.38" (35mm) maximum
  • Feed crank wheel for manual feed
  • Depth scale and adjustable depth stop
  • Drilling capacity: 1.57”
  • Table set up area: 21” x 17”
  • Tapping capacity, steel: M 24 null
  • 5 Year Parts Warranty 
  • Drilling capacity: 1.97”
  • Speed range: 50 rpm - 2200 rpm
  • Quill stroke: 8”
  • 5 Year Parts Warranty 
  • Drilling capacity: 1.26”
  • Table set up area: 20”x17”
  • Head swivel range: ±45°
  • 5 Year Parts Warranty
  • 2 head drill press
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
$27,510.00
$26,795.00
  • Motor: 1-1/2HP 1Ph 115V
  • Swing: 22"
  • Drilling Capacity: 1-1/4”
  • Overall Height: 68-3/4”
$1,942.00
$1,788.22
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • Single head drill press
  • 3 head drill press
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
$37,795.00
$36,495.00
  • 2 hp motor runs on 220-volt 3-phase power.
  • 26-3/4” swing to tackle large pieces of material
  • Drills a maximum capacity of 1.57” with a tapping capacity of up to 1”
  • Massive column and cast steel base reduce flexing even when you’re drilling at full capacity
$14,741.43
$11,999.00
  • Motor: 3/4HP 1Ph 115V
  • Swing: 17"
  • Drilling Capacity: 3/4"
  • Overall Height: 64-1/2”
$1,108.00
$1,067.33
  • Drilling capacity: 1.26”
  • Table set up area: 13” x 13”
  • Throat: 10”
  • Spindle nose-to-table surface distance: 32”
  • Drilling capacity in steel: up to 1.57" (40mm) maximum
  • Drilling capacity in cast iron: up to 1.77" (45mm) maximum
  • Depth scale and adjustable depth stop
  • Built-in low voltage electrical equipment in machine head
  • Drilling capacity in steel: up to 1.57" (40mm) maximum
  • Drilling capacity in cast iron: up to 1.77" (45mm) maximum
  • Machine base with 2 T-slots, coolant tank and pump
  • Drill guard with microswitch
  • Easily accessible table raiser
  • Head tilts left or right
  • Large production table and T-slotted base
  • Three power downfeed rates
$6,342.86
$5,119.00
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • 2 head drill press
$30,185.00
$29,495.00
  • Main Motor: 1 1/2 HP
  • Table 22" x 19 1/2"
  • Spindle Stroke: 5 1/8"
  • Spindle RPM: 60~1500 RPM
  • Simple push or pull on the center bar knob sets the jaw in position
  • Base is designed for clear through drilling applications
  • Easy press locking lever cams the jaw ahead 3/32”
  • Unique top locking lever can be raised or lowered to
$324.00
$216.66
  • Quick Change Bit 
  • Motor HP 1/2
  • Drill Capacity 5/8" 
  • Speed Range 240-3400fpm
  • Overall Height 64"
  • Tapping capacity in steel: up to .87" (30mm) maximum
  • Tapping capacity in cast iron: up to 1.18" (30mm) maximum
  • Large worktable with 3 T-slots,
  • Emergency STOP