Semi-automatic Cold Saws

  • Maximum Diameter Blade: 500 mm
  • Cutting Speed: 3,000 RPM           
  • Motor: 5.5 hp, 230 Volt, 3 Phase
  • Made in the Spain with a 3-year parts warranty
  • Cutting Speeds: (VS) 5 hp, 11 to 177 rpm
  • Semi-automatic cycle
  • Motor: 5 hp, 220 Volt, 1 Phase
  • Made in the USA with a 3-year parts warranty
  • Maximum Diameter Blade: 600 mm
  • Cutting Speed: 3,000 RPM           
  • Motor: 5.5 hp, 230 Volt, 3 Phase
  • Made in the Spain with a 3-year parts warranty
  • Max Blade Diameter: 12.5"
  • Spindle Diameter: 40 mm
  • Capacity Round at 90 Deg: 4"
  • Capacity Square at 90 Deg: 3.25"
$11,500.00
$11,098.00
  • Cutting Speeds: (LT) 3 hp, 22/44 rpm
  • Semi-automatic cycle
  • Motor: 3 hp, 208 Volt, 3 Phase
  • Made in the USA with a 3-year parts warranty
  • Maximum Diameter Blade: 500 mm
  • Cutting Speed: 3,000 RPM           
  • Motor: 5.5 hp, 460 Volt, 3 Phase
  • Made in the Spain with a 3-year parts warranty
  • Maximum Diameter Blade: 600 mm
  • Cutting Speed: 3,000 RPM           
  • Motor: 5.5 hp, 460 Volt, 3 Phase
  • Made in the Spain with a 3-year parts warranty
  • Miters left and right 
  • Centering vise 
  • Cuts non-ferrous metals 
  • Blade turns at 3200 rpm
$17,689.43
$14,399.00
  • Max Vise Opening: 8"
  • Blade Size: 14"
  • Round at 90 Deg: 4.75"
  • Square at 90 Deg: 4.5"
$13,250.00
$12,537.00
  • 41/4" Capacity
  • Pneumatic centering vise, hydraulic blade descent
  • Automatic shut-off and vise release
  • 220V, 3PH
$16,975.71
$13,989.00

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

$36,255.71
$29,869.00
  • 230v/460v/60/3 Electricals
  • Self-Centering Vise with Angle Scale
  • Flood Coolant System
  • Two (2) Year Limited Warranty
  • Saw blade size: 18”
  • Cutting capacity (thickness x width): 2” x 12”/ 3” x 11” / 4” x 10”
  • Saw blade speed: 3200 RPM
  • Motor: 10 HP IE3
  • Max Blade Diameter: 14.5"
  • Spindle RPM: 18 & 36
  • Capacity Round at 90 Deg: 4" 
  • Capacity Square at 90 Deg: 4"
$13,250.00
$12,645.00
  • Max Blade Diameter: 14.5"
  • Infinitely Variable: 13-76 
  • Capacity Round at 90 Deg: 4"
  • Capacity Square at 90 Deg: 4"
$17,990.00
$16,972.00
  • Cutting Speeds: 5 hp, 3,000 rpm
  • Semi-Automatic Cycle
  • Motor: 5 hp, 460 Volt, 3 Phase
  • Made in the USA with a 3-year parts warranty
  • 11" Blade
  • Semi-Automatic operation - manual feed also available
  • Self centering vice
  • 2.75" Tube Capacity 
$10,121.43
$8,345.00
  • Cutting Speeds: (VS) 5 hp, 11 to 177 rpm
  • Semi-automatic cycle
  • Motor: 5 hp, 230 Volt, 3 Phase
  • Made in the USA with a 3-year parts warranty
  • Maximum Diameter Blade: 275 mm
  • Motor: 60 RPM, 220 Volt, 1 Phase
  • Semi-Automatic Cycle
  • Made in the USA with a 3-year parts warranty
  • Maximum Diameter Blade: 275 mm   
  • Motor: 30/60 RPM, 208 Volt, 3 Phase
  • Semi-Automatic Cycle
  • Made in the USA with a 3-year parts warranty
  • Cutting Speeds: (SS) 3 hp, 44 rpm
  • Semi-automatic cycle
  • Motor: 3 hp, 220 Volt, 1 Phase
  • Made in the USA with a 3-year parts warranty
  • Cutting Speeds: (LT) 3 hp, 22/44 rpm
  • Semi-automatic cycle
  • Motor: 3 hp, 230 Volt, 3 Phase
  • Made in the USA with a 3-year parts warranty
  • Cutting Speeds: (VS) 5 hp, 11 to 177 rpm
  • Semi-automatic cycle
  • Motor: 5 hp, 460 Volt, 3 Phase
  • Made in the USA with a 3-year parts warranty
  • Maximum Saw Blade Size Ø: 10"
  • Nominal Current: 4.7 A
  • Power: 2.5 HP
  • Motor Power: 1.75 – 2.5 HP