Semi-automatic Cold Saws

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• 11" Blade
• Semi-Automatic operation - manual feed also available
• Self centering vice
• 2.75" Tube Capacity 

• Accepts Up To 17" Blade
• Semi-Automatic Operation
• Dual Miter Swivel Head
• Tool Gap Compensation Device

• Head Rotates 45º Right and 90º Left
• 3.5/4.5 HP Motor 
• Blade Size 14-1/2" 
• Blade Speed 1500-3000fpm
• Solid Round 90º Capacity 4" 
• Solid Rectangle 90º 4"x7"

• Vertical column saw specifically built for production
• 51/16" Tube Capacity at 90º
• 4" Square Capacity at 90º
• Large automatic clamping vise features adjustable gib guides, removeable face plates, and anti-burr arm

• Maximum Vice Opening: 120mm (4.70")
• The NEW 350-S can run at 2 different speeds: 40-80 R.P.M.
• The NEW 350-S is to be equipped with a 350mm (14") Blade.
• Electrical: The NEW 350-S can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.

• Maximum vice opening: 180mm (7")
• The NTS 370 can run at 2 different speeds: 25-50 R.P.M.
• Square Tube Cutting at 90° (Straight Cut) - 4.50"
• Square Tube Cutting at 45° - 3.75"

• Maximum vice opening: 185mm (7.25")
• The NTM 350-S can run at 2 different speeds: 33-66 R.P.M.
• Square Tube Cutting at 90° (Straight Cut) - 3.75"
• Square Tube Cutting at 45° Right - 3.50"