Semi-automatic Cold Saws

  • 2HP / 220V / 3PH
  • 5-1/2" STROKE
  • Clamping device for short ends
  • Recirculation coolant system

  • Tubing at 45 Deg Square: 4" x 4"
  • Maximum Diameter Blade: 14"
  • Arbor Bore: 1-9/16"
  • Call For Special Pricing

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

$20,295
$19,295
Save $1,000!

  • 41/4" Capacity
  • Pneumatic centering vise, hydraulic blade descent
  • Automatic shut-off and vise release
  • 220V, 3PH

  • 3HP / 220V / 3PH
  • 6-3/10" STROKE
  • Recirculation coolant system
  • Adjustable material length stop

  • 230v/460v/60/3 Electricals
  • Self-Centering Vise with Angle Scale
  • Flood Coolant System
  • Two (2) Year Limited Warranty

  • Maximum vice opening: 7"
  • Square Tube Cutting at 90 Degrees - 4.25"
  • Square Tube Cutting at 45 Degrees - 3.75"
  • Rectangular Tube Cutting at 90 Degrees - 7.0"W x 3.75"H

  • Tubing at 90 Deg Round: 4-1/2"
  • Tubing at 45 Deg Round: 4-1/4"
  • Cutting Speed: 3,000 rpm
  • Call For Special Pricing

  • Max Vise Opening: 8"
  • Blade Size: 14"
  • Round at 90 Deg: 4.75"
  • Square at 90 Deg: 4.5"

  • 2HP / 220V / 3PH
  • 5-1/2" STROKE
  • Clamping device for short ends
  • Recirculation coolant system

 


  • Accepts Up To 17" Blade
  • Semi-Automatic Operation
  • Dual Miter Swivel Head
  • Tool Gap Compensation Device
$17,395
$16,525.25
Save $869.75!

  • Tubing 90 Deg Square: 3" x 3"
  • Maximum Diameter Blade: 10-3/4"
  • Pin Spacing: 2/8/45
  • Call For Special Pricing

  • 2HP / 220V / 3PH
  • 5-1/2" STROKE
  • Recirculation coolant system
  • Adjustable material length stop

  • Vertical column saw specifically built for production
  • 51/16" Tube Capacity at 90º
  • 4" Square Capacity at 90º
  • Large automatic clamping vise features adjustable gib guides, removeable face plates, and anti-burr arm
$20,575
$19,595
Save $980!

  • Accepts Up To 16" Blade
  • Semi-Automatic Operation
  • Dual Miter Swivel Head
  • Automatic Blade Shut-Off
$16,295
$15,480.25
Save $814.75!

  • Maximum vice opening: 180mm (7")
  • The NTS 370 can run at 2 different speeds: 25-50 R.P.M.
  • Square Tube Cutting at 90° (Straight Cut) - 4.50"
  • Square Tube Cutting at 45° - 3.75"

  • Maximum vice opening: 185mm (7.25")
  • The NTM 350-S can run at 2 different speeds: 33-66 R.P.M.
  • Square Tube Cutting at 90° (Straight Cut) - 3.75"
  • Square Tube Cutting at 45° Right - 3.50"

  • Max Blade Diameter: 14.5"
  • Infinitely Variable: 13-76 
  • Capacity Round at 90 Deg: 4"
  • Capacity Square at 90 Deg: 4"

  • Maximum Vice Opening: 120mm (4.70")
  • The NEW 350-S can run at 2 different speeds: 40-80 R.P.M.
  • The NEW 350-S is to be equipped with a 350mm (14") Blade.
  • Electrical: The NEW 350-S can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.

  • Miters left and right 
  • Centering vise 
  • Cuts non-ferrous metals 
  • Blade turns at 3200 rpm
$9,095
$8,689
Save $406!

  • Head Rotates 45º Right and 90º Left
  • 3.5/4.5 HP Motor 
  • Blade Size 14-1/2" 
  • Blade Speed 1500-3000fpm
  • Solid Round 90º Capacity 4" 
  • Solid Rectangle 90º 4"x7"
$20,575
$19,595
Save $980!

  • Cutting Speed: 3,000 RPM
  • Arbor Bore: 1.97"
  • Motor Rate: 5.5 hp
  • Call For Special Pricing

  • Speeds 4861
  • Blade Size 17.71" 
  • Motor .75HP 
  • Max. Tooth Height .314"
$13,495
$12,820.25
Save $674.75!

  • Max Blade Diameter: 12.5"
  • Spindle Diameter: 40 mm
  • Capacity Round at 90 Deg: 4"
  • Capacity Square at 90 Deg: 3.25"