By Category

Hoists & Cranes

  • Layout
Bison Lifting Equipment 1/2 Ton Single Phase Electric Lifting Chain Hoist HH-B05 at Elite Metal Tools
Bison Lifting Equipment 1/2 Ton Single Phase Electric Lifting Chain Hoist HH-B05
  • 1/2 Ton Lifting Capacity
  • 20 Ft Standard lift
  • H3 Classification
  • Electromagnetic load brake
$2,337.30
$2,104.00
As low as $68/mo
View Details
Jet JLP-150A-15, 1-1/2 Ton Lever Hoist with 15' Lift 287402 at Elite Metal Tools
Jet JLP-150A-15, 1-1/2 Ton Lever Hoist with 15' Lift 287402
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
$630.00
$441.00
View Details
MPI 28” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-700-REN at Elite Metal Tools
MPI 28” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-700-REN
  • Chuck Diameter: 28”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
$17,822.00
$15,965.00
As low as $315/mo
View Details
Jet PBC-410AEH, VFD 4-Button Control Pendant 10' Cord 162410 at Elite Metal Tools
Jet PBC-410AEH, VFD 4-Button Control Pendant 10' Cord 162410
  • 10' Power cord length to match an electric hoist with 10' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
  • Compatible with VOLT Series Hoist and Trolley combinations
  • Backed by our industry leading 2-Year Warranty
$237.00
$169.00
View Details
Jet 3-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-300WO-30 207130 at Elite Metal Tools
Jet 3-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-300WO-30 207130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
$2,152.00
$1,372.99
As low as $44/mo
View Details
Jet 3SS-1C-20, 3-Ton Electric Chain Hoist 1-Phase 20' Lift 312000 at Elite Metal Tools
Jet 3SS-1C-20, 3-Ton Electric Chain Hoist 1-Phase 20' Lift 312000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
$7,952.00
$5,078.00
As low as $165/mo
View Details
MPI 3968lbs Flat Capacity 2425lbs Round Capacity Battery Lifting Magnet with 12V Battery and Remote Control BMP-3968 at Elite Metal Tools
MPI 3968lbs Flat Capacity 2425lbs Round Capacity Battery Lifting Magnet with 12V Battery and Remote Control BMP-3968
  • Workload Limit Flat Material: 3,968 lbs
  • Workload Limit Round Material: 2,425 lbs
  • Height up to Crane Hook: 24”
  • Base: 9.5” x 18.5”
$9,993.00
$9,675.00
As low as $314/mo
View Details
Jet 15-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1500WO-30 109130 at Elite Metal Tools
Jet 15-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1500WO-30 109130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
$8,830.00
$5,629.38
As low as $182/mo
View Details
MPI 10”x20” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-250500-REN at Elite Metal Tools
MPI 10”x20” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-250500-REN
  • Chuck Dimensions: 10” x 20”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
$4,722.00
$4,025.00
As low as $130/mo
View Details
Jet JG-150A, 1-1/2 Ton Grip Puller with Cable 286515K at Elite Metal Tools
Jet JG-150A, 1-1/2 Ton Grip Puller with Cable 286515K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
$999.00
$638.99
As low as $20/mo
View Details
MPI 2976lbs Lift Capacity Battery Lifting Magnet with 12V Battery and Remote Control BM-2976 at Elite Metal Tools
MPI 2976lbs Lift Capacity Battery Lifting Magnet with 12V Battery and Remote Control BM-2976
  • Workload Limit Flat Material: 2,976 lbs
  • Battery: 12V/35Ah
  • Base: 9.5” x 10.7”
  • Height up to Crane Hook: 18.1”
$7,433.00
$7,025.00
As low as $228/mo
View Details
Jet JG-300, 3 Ton Grip Puller Without Cable 286530 at Elite Metal Tools
Jet JG-300, 3 Ton Grip Puller Without Cable 286530
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
$1,072.00
$669.00
As low as $21/mo
View Details
Bison Lifting Equipment 3 Ton 3-Phase Single Speed Electric Lifting Chain Hoist HHBD03SK-01 at Elite Metal Tools
Bison Lifting Equipment 3 Ton 3-Phase Single Speed Electric Lifting Chain Hoist HHBD03SK-01
  • 3 Ton Lifting Capacity
  • 20 Ft Standard lift
  • 30 Minute duty rating, H4 Classification
  • Pull-rotor motor brake
$5,739.50
$5,166.00
As low as $167/mo
View Details
MPI 10”x20” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-250500-SGC at Elite Metal Tools
MPI 10”x20” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-250500-SGC
  • Chuck Size: 10” x 20”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
$6,202.00
$5,599.00
As low as $181/mo
View Details
Bison Lifting Equipment 3 Ton 3-Phase Single Speed Electric Lifting Chain Hoist with Trolley HHBD03SK-01+WPC03 at Elite Metal Tools
Bison Lifting Equipment 3 Ton 3-Phase Single Speed Electric Lifting Chain Hoist with Trolley HHBD03SK-01+WPC03
  • 3 Ton Lifting Capacity
  • 20 Ft Standard lift
  • 30 Minute duty rating, H4 Classification
  • Trolley Included
$7,133.80
$6,420.00
As low as $208/mo
View Details
Bison Lifting Equipment 1 Ton 3-Phase Single Speed Electric Lifting Chain Hoist HHBD01SK-01 at Elite Metal Tools
Bison Lifting Equipment 1 Ton 3-Phase Single Speed Electric Lifting Chain Hoist HHBD01SK-01
  • 1 Ton Lifting Capacity
  • 20 Ft Standard lift
  • 30 Minute duty rating, H4 Classification
  • Pull-rotor motor brake
$3,042.00
$2,738.00
As low as $88/mo
View Details
Norco 85/55 Ton Air/Hydraulic Floor Jack 72255 at Elite Metal Tools
Norco 85/55 Ton Air/Hydraulic Floor Jack 72255
  • Lift Height Low: 8.6"
  • Lift Height High: 16.2"
  • Piston Stroke: 7.5"
  • P.S.I. Range: 150-175
$7,251.28
$4,025.00
As low as $130/mo
View Details
Jet 3SS-3C-15, 3-Ton Electric Chain Hoist 3-Phase 15' Lift 331500 at Elite Metal Tools
Jet 3SS-3C-15, 3-Ton Electric Chain Hoist 3-Phase 15' Lift 331500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
$7,585.00
$4,839.99
As low as $157/mo
View Details
Jet 5-Ton Hand Chain Hoist with 10' Lift | S90-500-10 101950 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 10' Lift | S90-500-10 101950
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
$1,152.00
$737.99
As low as $23/mo
View Details
MPI 1320lbs Flat Capacity 660lbs Round Capacity Permanent Lifting Magnet LM-0600-REN at Elite Metal Tools
MPI 1320lbs Flat Capacity 660lbs Round Capacity Permanent Lifting Magnet LM-0600-REN
  • Workload Limit Flat Material: 1,320 lbs
  • Workload Limit Round Material: 660 lbs
  • Temperature Max: 80°C / 176°F
  • Diameter of Eye: .08”
$1,579.00
$1,225.00
As low as $39/mo
View Details
Jet 1/2-Ton Hand Chain Hoist with 30' Lift | S90-050-30 101903 at Elite Metal Tools
Jet 1/2-Ton Hand Chain Hoist with 30' Lift | S90-050-30 101903
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
$513.00
$327.99
View Details
MPI 6”x12” 90N Holding Force Electromagnet Longitudinal Pole Surface Grinding Chuck EMLP-150300-SCG at Elite Metal Tools
MPI 6”x12” 90N Holding Force Electromagnet Longitudinal Pole Surface Grinding Chuck EMLP-150300-SCG
  • Chuck Size: 6” x 12”
  • Holding force: 90N/cm² / 130lbs/in²
  • Min Workpiece Size: 25mm x 25mm x 3mm / 1” x 1” x 0.12”
  • Regrinding limit: 6mm / 0.236”
$2,211.00
$1,975.00
As low as $64/mo
View Details
MPI 10” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-250-REN at Elite Metal Tools
MPI 10” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-250-REN
  • Chuck Diameter: 10”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
$3,123.00
$2,755.00
As low as $89/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 15' Lift | 1SS-1C-15 111500 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 15' Lift | 1SS-1C-15 111500
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
$5,524.00
$3,520.00
As low as $114/mo
View Details