By Category

Hoists & Cranes

Jet 1-1/2-PT, 1-1/2-Ton Heavy Duty Manual Trolley 252015

Built-in bumper guards on the side plates increase safety and extend trolley life
Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection

$430.00

$274.99

View Details

MPI 4400lbs Flat Capacity 2200lbs Round Capacity Permanent Lifting Magnet LM-2000-REN

Workload Limit Flat Material: 4,400 lbs
Workload Limit Round Material: 2,200 lbs
Temperature Max: 80°C / 176°F
Diameter of Eye: .08”

$4,450.00

$3,665.00

As low as $119/mo

View Details

MPI 2200lbs Flat Capacity 1100lbs Round Capacity Permanent Lifting Magnet LM-1000-REN

Workload Limit Flat Material: 2,200 lbs
Workload Limit Round Material: 1,100 lbs
Temperature Max: 80°C / 176°F
Diameter of Eye: .08”

$2,558.00

$2,010.00

As low as $65/mo

View Details

Jet 1-Ton Hand Chain Hoist with 30' Lift | S90-100-30 101913

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

$552.00

$399.00

View Details

Jet 1/4-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-250WO-15 101225

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

$536.00

$395.00

View Details

MPI 8”x18” 90N Holding Force Electromagnet Longitudinal Pole Surface Grinding Chuck EMLP-200450-SCG

Chuck Size: 8” x 18”
Holding force: 90N/cm² / 130lbs/in²
Min Workpiece Size: 25mm x 25mm x 3mm / 1” x 1” x 0.12”
Regrinding limit: 6mm / 0.236”

$3,523.00

$3,135.00

As low as $101/mo

View Details

Jet JLH-50-10, 1/2-Ton Compact Lever Hoist With 10' Lift 181510

Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
Cast steel safety latches
Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
Heat Treated Load Plates

$452.00

$295.80

View Details

Jet 10-PT, 10-Ton Heavy Duty Manual Trolley 252060

Built-in bumper guards on the side plates increase safety and extend trolley life
Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection

$2,501.00

$1,601.99

As low as $52/mo

View Details

Jet MT100, 1- Ton Two Speed Electric Trolley 3-Phase 230V 140185

Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
TAA Approved
Two speeds reduces bump firing to while still allowing high speed movement of materials
Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
Expanded flange capacity kits are available

$3,438.00

$2,156.99

As low as $70/mo

View Details

Jet MT200-4, 2 Ton Two Speed Electric Trolley 3-Phase 460V 144187

Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
TAA Approved
Two speeds reduces bump firing to while still allowing high speed movement of materials
Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
Expanded flange capacity kits are available

$3,793.00

$2,379.99

As low as $77/mo

View Details

MPI 12”x32” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-300800-SGC

Chuck Size: 12” x 32”
Holding force: 110N/cm² / 159lbs/in²
Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
Regrinding limit: 6 mm / .236"

$10,219.00

$9,399.00

As low as $305/mo

View Details

Jet 2SS-1C-10, 2-Ton Electric Chain Hoist 1-Phase 10' Lift 211000

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

$6,450.00

$4,114.99

As low as $133/mo

View Details

Jet 1/8-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-275-10 110100

Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

$2,710.00

$1,732.00

As low as $56/mo

View Details

Magswitch CE11000 Cordless Electric 11000 Pound Breakaway Force Magnetic Lifter 8140980

Maximum Breakaway Force: 33,070 lb / 15,000 kg
Breakaway Force (@ SWL 3:1): 11,000 lb / 5,000 kg
Number of Cycles per Charge: 300
Hold Surface (LxW): 26.7” x 15”

$12,499.00

As low as $406/mo

View Details

Jet HD-3T, 3-Ton Wide Beam Clamp 202730

Clamp jaw is designed to distribute the load away from the beam flange edge
Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
Complies with ANSI / ASME B30.17 and B30.20 standards
Load tested to 125% of capacity with certificate
Used for quick mounting of a hoist on a broad range of beams up to 12-3/5 inches wide for increased versatility

$226.00

$163.00

View Details

Jet 1/2-Ton Electric Chain Hoist 1-Phase 15' Lift | 1/2SS-1C-15 121150

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

$4,460.00

$2,844.00

As low as $92/mo

View Details

Jet JLP-025A-10 1/4 Ton Mini-Puller, 10' Lift 287101

Cast steel safety latches are secured with Allen screws and lock nuts
Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
Hooks slowly stretch to indicate an overload situation increasing jobsite safety
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging

$294.00

$198.00

View Details

Jet VOLT 2T Variable-Speed Electric Hoist 3PH 230V 10' Lift 183210

Electromagnetic brake design is an industry-proven safety feature that secures the load even if power is interrupted to the hoist
Eliminates bump-firing when positioning the work piece reducing downtime and maintenance
Heavy-duty nylon chain bag with reinforcing metal brackets included
Industry proven Grade 80 black oxide coated load chain
JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments

$9,245.00

$5,893.99

As low as $191/mo

View Details

MPI 6”x18” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-150450-REN

Chuck Dimensions: 6” x 18”
Holding Force: 100N/cm² / 145lbs/in²
Min Workpiece Size: 0.02” x 0.02” x 0.04”
Regrinding Limit: 7mm / 0.275”

$2,339.00

$1,955.00

As low as $63/mo

View Details

Jet JG-75, 3/4 Ton Grip Puller Without Cable 286575

A double sealed ratchet brake system increases safety on the jobsite
Available in 3/4, 1-1/2 and 3-Ton pulling capacities
Designed to lift, lower, stretch or pull heavy loads
Double Sealed Ratchet Brake System
Lightweight zinc coated steel is used to resist corrosion

$506.00

$317.99

View Details

Jet JLP-075A-5, 3/4 Ton Lever Hoist, 5' Lift 287300

Grade 80 black oxide coated load chain for added durability
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load

$434.00

$284.58

View Details

Jet JLP-150A-5SH, 1-1/2 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287700

All steel construction
Impact resistant all steel construction for added durability and protection
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort

$548.00

$399.00

View Details

Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515

A double sealed ratchet brake system increases safety on the jobsite
Available in 3/4, 1-1/2 and 3-Ton pulling capacities
Designed to lift, lower, stretch or pull heavy loads
Double Sealed Ratchet Brake System
Lightweight zinc coated steel is used to resist corrosion

$664.00

$455.00

View Details

Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-460-015 144005

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments

$8,324.00

$5,221.00

As low as $169/mo

View Details