By Category

Hoists & Cranes

  • Layout
Jet TS300-460-015,3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144011K at Elite Metal Tools
Jet TS300-460-015,3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144011K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
$14,692.00
$9,214.00
As low as $299/mo
View Details
Jet TS500-460-010,5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT500-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144013K at Elite Metal Tools
Jet TS500-460-010,5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT500-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144013K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
$18,118.00
$11,364.00
As low as $369/mo
View Details
Jet 2-HDT, 2-Ton Manual Trolley 262020 at Elite Metal Tools
Jet 2-HDT, 2-Ton Manual Trolley 262020
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
$336.00
$220.00
View Details
MPI 12”x24” 32 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-300600-EP at Elite Metal Tools
MPI 12”x24” 32 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-300600-EP
  • Chuck Size: 12” x 24”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2”  x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
$8,009.00
$7,599.00
As low as $246/mo
View Details
MPI 12”x36” 48 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-300900-EP at Elite Metal Tools
MPI 12”x36” 48 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-300900-EP
  • Chuck Size: 12” x 36”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
$9,345.00
$8,999.00
As low as $292/mo
View Details
MPI 16”x40” 72 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-420990-EP at Elite Metal Tools
MPI 16”x40” 72 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-420990-EP
  • Chuck Size: 16” x 40”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
$17,180.00
$16,499.00
As low as $326/mo
View Details
MPI 18”x20” 42 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-480490-EP at Elite Metal Tools
MPI 18”x20” 42 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-480490-EP
  • Chuck Size: 18” x 20”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
$9,707.00
$9,199.00
As low as $298/mo
View Details
MPI 18”x24” 56 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-480600-EP at Elite Metal Tools
MPI 18”x24” 56 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-480600-EP
  • Chuck Size: 18” x 24”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
$11,845.00
$11,299.00
As low as $367/mo
View Details
MPI 22”x32” 80 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-580800-EP at Elite Metal Tools
MPI 22”x32” 80 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-580800-EP
  • Chuck Size: 22” x 32”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
$16,030.00
$15,499.00
As low as $306/mo
View Details
MPI 22”x36” 96 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-580900-EP at Elite Metal Tools
MPI 22”x36” 96 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-580900-EP
  • Chuck Size: 22” x 36”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
$17,368.00
$16,699.00
As low as $330/mo
View Details
MPI 8” 160N Holding Force Rare Earth Round Permanent Magnetic Chuck MAX-200-REN at Elite Metal Tools
MPI 8” 160N Holding Force Rare Earth Round Permanent Magnetic Chuck MAX-200-REN
  • Chuck Diameter: 8”
  • Holding Force: 160N/cm² / 232lbs/in²
  • Min Workpiece Size: 40mm x 8mm / 1.57” x 0.314”
  • Regrinding Limit: 10mm / 0.393”
$2,617.00
$2,265.00
As low as $73/mo
View Details
MPI 14” 160N Holding Force Rare Earth Round Permanent Magnetic Chuck MAX-350-REN at Elite Metal Tools
MPI 14” 160N Holding Force Rare Earth Round Permanent Magnetic Chuck MAX-350-REN
  • Chuck Diameter: 14”
  • Holding Force: 160N/cm² / 232lbs/in²
  • Min Workpiece Size: 40mm x 8mm / 1.57” x 0.314”
  • Regrinding Limit: 10mm / 0.393”
$5,667.00
$4,955.00
As low as $161/mo
View Details
Jet 3-Ton Hand Chain Hoist with 15' Lift | S90-300-15 101941 at Elite Metal Tools
Jet 3-Ton Hand Chain Hoist with 15' Lift | S90-300-15 101941
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
$788.00
$524.00
As low as $17/mo
View Details
Jet JLH-25-5, 1/4-Ton Compact Lever Hoist With 5' Lift 181205 at Elite Metal Tools
Jet JLH-25-5, 1/4-Ton Compact Lever Hoist With 5' Lift 181205
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
$385.00
$251.99
View Details
Jet JLP-300A-5, 3 Ton Lever Hoist with 5' Lift 287500 at Elite Metal Tools
Jet JLP-300A-5, 3 Ton Lever Hoist with 5' Lift 287500
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
$740.00
$495.00
View Details
Jet 3-Ton 5/8" Wire Rope 66 Feet 286529 at Elite Metal Tools
Jet 3-Ton 5/8" Wire Rope 66 Feet 286529
  • 5/8" diameter
$322.00
$213.99
View Details
Jet 3-Ton Hand Chain Hoist with 30' Lift | S90-300-30 101943 at Elite Metal Tools
Jet 3-Ton Hand Chain Hoist with 30' Lift | S90-300-30 101943
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
$1,185.00
$758.99
As low as $24/mo
View Details
Jet 2-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-200WO-20 206121 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-200WO-20 206121
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
$1,024.00
$655.86
As low as $21/mo
View Details
Jet JLP-300A-15 3 Ton Lever Hoist with 15' Lift 287502 at Elite Metal Tools
Jet JLP-300A-15 3 Ton Lever Hoist with 15' Lift 287502
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
$840.00
$549.78
As low as $17/mo
View Details
Jet 1-1/2-Ton Hand Chain Hoist with 20' Lift | S90-150-20 101922 at Elite Metal Tools
Jet 1-1/2-Ton Hand Chain Hoist with 20' Lift | S90-150-20 101922
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
$598.00
$424.00
View Details
Jet 3-PT, 3-Ton Heavy Duty Manual Trolley 252030 at Elite Metal Tools
Jet 3-PT, 3-Ton Heavy Duty Manual Trolley 252030
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
$914.00
$584.46
As low as $18/mo
View Details
Jet JBC-5, 5-Ton Beam Clamp 252750 at Elite Metal Tools
Jet JBC-5, 5-Ton Beam Clamp 252750
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Larger, thicker diameter pins for increased durability and life
  • Load tested to 125% of capacity with certificate
$440.00
$281.99
View Details
Jet 3-HDT, 3-Ton Manual Trolley 262030 at Elite Metal Tools
Jet 3-HDT, 3-Ton Manual Trolley 262030
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
$656.00
$455.00
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS050-010 104022 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS050-010 104022
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
$6,798.00
$4,263.99
As low as $138/mo
View Details