Hoists & Cranes

  • Chuck Diameter: 32”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
$24,860.00
$22,279.00
  • Chuck Diameter: 20”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
$10,046.00
$8,999.00
  • Capacity @ 200 PSI: 10 Ton
  • Lift Height High: 50"
  • Saddle Reach: 14.75"
  • Automatic safety lock engages in six different height positions independent of air pressure
$9,230.77
$5,125.00
  • Voltage: 110V
  • Depth of Magnetic Field: max 1.57” / 40mm
  • 10 ft Power Supply Cable with Plug
  • Duty Cycle: 20%, maximum operating time 10 minutes
$1,370.00
$1,299.00
  • Capacities @ 65”: 3 Ton
  • Min. Boom Height: 13"
  • Max. Boom Height: 149.5"
  • Includes an electro/hydraulic pump requiring 115 VAC
$18,205.13
$10,085.00
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
  • Capacity @ 200 PSI: 10 Ton
  • Lift Height Low: 12.25"
  • Lift Height High: 49.5"
  • Saddle Reach: 11.18"
$6,810.26
$3,795.00
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
$1,730.00
$1,106.70
  • Lift Height Low: 7.25"
  • Lift Height High: 26.25”
  • Handle Length: 45”
  • Capacity @ 120 PSI: 20 Ton
$6,763.08
$3,735.00
  • Lift Height Low: 7.25"
  • Lift Height High: 26.25"
  • Handle Length: 45”
  • Includes the FASTJACK® feature which raises the jack’s lifting saddle to the load with one pump of the “T” handle
$6,059.49
$3,365.00
  • Capacities @ 65”: 3 Ton
  • Min. Boom Height: 13"
  • Max. Boom Height: 149.5"
  • Includes a foot activated air/hydraulic foot pump requiring 100 P.S.I. air pressure
$14,902.56
$8,225.00
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
$7,506.00
$4,784.00
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
$5,666.00
$3,618.00
  • Capacity @ 180 PSI: 8.5 Ton
  • Lift Height High: 50"
  • Saddle Reach: 50"
  • Includes extension tubes and adjustment pins for added height requirements
$13,835.90
$7,645.00
  • 2 Ton Lifting Capacity
  • 20 Ft Standard lift
  • H3 Classification
  • Electromagnetic load brake
$3,286.00
$2,957.00
  • 3 Ton Lifting Capacity
  • 20 Ft Standard lift
  • H3 Classification
  • Electromagnetic load brake
$4,277.50
$3,850.00
  • 2 Ton Lifting Capacity
  • 20 Ft Standard lift
  • 30 Minute duty rating, H4 Classification
  • Trolley Included
$5,527.90
$4,975.00
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
$1,384.00
$883.00
  • Lift Height High: 15.375"
  • Piston Stroke: 9.5"
  • Handle Length: 61.75”
  • P.S.I. Range: 100-175
$7,259.49
$4,025.00
  • Lift Height Low: 8.75"
  • Lift Height High: 16.5”
  • Piston Stroke: 7.875"
  • P.S.I. Range: 120-175
$6,112.82
$3,389.00
  • Chuck Size: 10” x 20”
  • Holding force: 90N/cm² / 130lbs/in²
  • Min Workpiece Size: 25mm x 25mm x 3mm / 1” x 1” x 0.12”
  • Regrinding limit: 6mm / 0.236”
$5,676.00
$5,175.00
  • Chuck Size: 10” x 24”
  • Holding force: 90N/cm² / 130lbs/in²
  • Min Workpiece Size: 25mm x 25mm x 3mm / 1” x 1” x 0.12”
  • Regrinding limit: 6mm / 0.236”
$5,891.00
$5,499.00
  • Chuck Size: 12” x 24”
  • Holding force: 90N/cm² / 130lbs/in²
  • Min Workpiece Size: 25mm x 25mm x 3mm / 1” x 1” x 0.12”
  • Regrinding limit: 6mm / 0.236”
$6,418.00
$5,899.00
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
$5,868.00
$3,749.00