Sanders

  • Large cast iron table has preset stops at 90° and 45° to let you use the belt sander vertically, horizontally or anywhere in between
  • Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on track during use
  • Graphite covered steel platen runs cooler increasing machine and belt life
  • Specially designed belt guard allows full use of the 6" belt width and length
  • Drive drum is rubber-coated for a better grip on the sanding belt resulting in less slippage
$1,105.71
$933.00
Save $173!

  • Motor - 1 Phase, 1 HP
  • Table Dimensions - 446 (17,6″) x 156 (6,1″) mm
  • Disc Diameter - 300 mm (11,8″)
  • Tilting - 45°
$299.00

  • Maximum Width: 25"
  • Motor: 220V / 5 HP
  • Drum: 5" x 25" Extruded Aluminum
  • Drum Speed: 1740 RPM

  • Sanding belt size: 37" X 60"
  • Max sanding height: 5.9"
  • Adjustable sanding platen: 3"
  • 220V / 1phase

  • Motor: 1-3/4hp 110V / 1ph
  • Maximum Width: 38" (Two Passes)
  • Drum Speed: 1740 RPM
  • Open Stand Included

  • Motor: 1-3/4 hp 100V / 1ph
  • Maximum Width: 13"
  • Drum: 5" x 13" extruded aluminum
  • Includes 1 Brush

  • Working width: 1.100 mm
  • Sanding belt width: 1.115 mm
  • Sanding belt length: 1.900 mm
  • Main standard motor power: 11 KW

  • Motor: 3 HP, 220V, single-phase, 17A, 1750 RPM
  • Table size: 59" x 23-3/4"
  • Table lateral travel: 18"
  • Sanding belt size: 6" x 186"

  • 5HP motor for plenty of power
  • Independently adjustable rear drum for fine tuning
  • Hard durometer rubber coating on steel drums provides flat, smooth finish
  • Two-speed gearbox for wide range of sanding projects.
  • Full size cast iron table for solid support
$5,528.57
$4,499.99
Save $1029!

  • 1.5 Horse Power
  • 13 Amp
  • 110V 
  • SIngle-phase
  • 3450 RPM
$975.00
$799.00
Save $176!

  • Photo electric belt tracking.
  • Pneumatic belt tensioning.
  • 6" internal dust chute.
  • 10HP, 1PH, 220V

  • Motor: 1-3/4 hp 110V / 1ph
  • Maximum Width: 50" (Two Passes)
  • Drum: 5" x 25" extruded aluminum
  • Drum Speed: 1740 RPM

  • Maximum Stock Width: 52"
  • Maximum Stock Thickness: 5"
  • Abrasive Belt Dimensions: 75”L x 52”W
  • Air Requirements: 90 PSI
$58,999.00
$49,999.99
Save $8999!

  • Sandsmart™ control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload
  • Conveyor bed parallelism is easily adjusted by turning the dial on the outside of the bed - no tools required
  • Parallelism adjust dial features a stop to quickly return the conveyor bed to a flat position
  • Dust hood includes an integrated channel that mirrors the shape of the drum and directs chips and dust to the 4" collection port
  • Precision-machined and dynamically balanced extruded aluminum drum is designed to dissipate heat and protect the work surface from heat-damage
$2,334.29
$1,899.99
Save $434!

  • Maximum Width: 37"
  • Motor: 5HP 220V
  • Drum: 5" x 37" (Extruded Aluminum)
  • Ball bearings (1"): 4, sealed and permanently lubricated

  • Maximum board width: 24"
  • Maximum board thickness: 6"
  • Sanding belt size: 25" x 60"
  • Motor: 15 HP, 220V/440V, 3-phase

  • Maximum board thickness: 6"
  • Minimum board length: 14"
  • Sanding belt size: 37" W x 60"
  • Footprint: 19" x 51-1/2"

  • Working width: 1.350 mm
  • Sanding belt width: 1.370
  • Sand belt length: 2.620 mm
  • Standard main motor power: 15 HP

  • 1" oscillating action reduces friction heat to protect wood and prolong sleeve life
  • Main spindle support runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for consistent performance
  • Oscillation gears run in a sealed lubricated box to prolong their life and durability
  • Table tilts to 45° to accommodate bevel sanding projects
  • Removable on/off safety switch prevents accidental start-up
$614.29
$544.00

  • 1.5 Horse Power
  • 110V
  • Single-Phase
  • 1725 RPM
$865.00
$730.00

  • Motor: 2 HP, 220V, single-phase, TEFC
  • Two 4" dust ports
  • Table size: 26-7/8" x 12"
  • Table travel: 3-3/4" Vertical, 5" Horizontal
$2,665.00
$2,131.95
Save $533!

  • Working width: 1.350 mm
  • Sanding belts width: 1.370 mm
  • Sanding belts length: 2.150 mm
  • Feed belt speed: 4.5/9 m/min

  • Motor: 1-3/4 hp 110V / 1ph
  • Maximum Width: 25"
  • Drum Speed: 1740 RPM
  • Dimensions (L x W x H): 31" x 46" x 43"

  • Sanding motor HP: 10 HP
  • Sanding belt size: 25" W x 75"
  • Min. board length: 9"
  • Min. board thickness: 1/8"