Tin Knocker

  • Layout
Tin Knocker 20 Ga. 2-Sided TK No. 24 Cheek Bender at Elite Metal Tools
Tin Knocker 20 Ga. 2-Sided TK No. 24 Cheek Bender
  • Capacity: 20 Ga Mild Steel (Galvanized) x 60"
  • Bend Length: 24"
  • Dimensions: 40" x 12" x 10"
  • Adjusts for 1/4" to 7/8" Bends
$1,025.00
As low as $33/mo
View Details
Tin Knocker 16Ga. Manual Slip Roll TK 1648 at Elite Metal Tools
Tin Knocker 16Ga. Manual Slip Roll TK 1648
  • Capacity: 16-gauge mild steel
  • Max. Forming Length: 49 inches
  • Roll Diameter: 3”
  • Gear Ratio: 4:1
$4,885.00
As low as $158/mo
View Details
Tin Knocker 115V Single Phase 14Ga. Hydraulic Corner Notcher at Elite Metal Tools
Tin Knocker 115V Single Phase 14Ga. Hydraulic Corner Notcher
  • Capacity in mild steel: 14 gauge
  • Maximum notch in one cut: 6” x 6”
  • Throat depth: 6-3/4 inches
  • Gage size: 6-1/4” x 2”
$4,285.00
As low as $139/mo
View Details
Tin Knocker 115V Single Phase 20Ga. Power Flanger with Stand TK No 20 at Elite Metal Tools
Tin Knocker 115V Single Phase 20Ga. Power Flanger with Stand TK No 20
  • Capacity: 20 Ga. Maximum
  • Flange Height: approx 7/32" for open-end fittings, straight, and irregular curves
  • Motor: 1/3 HP, 115V, Single Phase 
  • Dimensions: 25" x 25" x 41"
$3,015.00
As low as $97/mo
View Details
Tin Knocker 14 Ga. No.1 Throatless Hand Shear TK 1 at Elite Metal Tools
Tin Knocker 14 Ga. No.1 Throatless Hand Shear TK 1
  • Max Capacity (Mild Steel): 14 Ga.
  • Max Capacity (Stainless Steel): 18 Ga.
  • Height: 12" (less handle) 
  • Weight: 23 lbs
$585.00
As low as $19/mo
View Details
Tin Knocker 16 Gauge x 72" Universal Hand Brake TK 616 at Elite Metal Tools
Tin Knocker 16 Gauge x 72" Universal Hand Brake TK 616
  • Capacity with lower tooling flanges: 72" x 16Ga
  • Capacity without lower tooling flanges: 72" x 20Ga
  • Lift of beam: 1.5"
  • Min reverse bend: 5/8"
$9,350.00
As low as $303/mo
View Details
Tin Knocker 4ft x 22 Ga. Portable Brake TK 422 PB at Elite Metal Tools
Tin Knocker 4ft x 22 Ga. Portable Brake TK 422 PB
  • Capacity: 22 Ga Mild Steel
  • Bend Length: 48.25”
  • Beam Lift: 1”
  • Weight: 350 lbs.
$1,920.00
As low as $62/mo
View Details
Tin Knocker 4HP 230V Single Phase 3” x 79” Belt Grinder HM TAS 75-1 at Elite Metal Tools
Tin Knocker 4HP 230V Single Phase 3” x 79” Belt Grinder HM TAS 75-1
  • Motor: 4 HP, 1 Phase 230 Volt
  • Belt Size: 3” x 79”
  • RPMs: 2860
  • Belt Speed: 6630 s/m
$1,950.00
$1,799.00
As low as $58/mo
View Details
Tin Knocker 4HP 230V Three Phase 3” x 79” Belt Grinder HM TAS 75-3 at Elite Metal Tools
Tin Knocker 4HP 230V Three Phase 3” x 79” Belt Grinder HM TAS 75-3
  • Motor: 4 HP, 3 Phase 230 Volt
  • Belt Size: 3” x 79”
  • RPMs: 2860
  • Belt Speed: 6630 s/m
$1,950.00
$1,799.00
As low as $58/mo
View Details
Tin Knocker 20ga x 50” Straight Brake with Angled Nose Bar HM MB 1300L at Elite Metal Tools
Tin Knocker 20ga x 50” Straight Brake with Angled Nose Bar HM MB 1300L
  • Actual max bend length: 53”
  • Max Capacity: 20-gauge mild steel
  • Max opening: 1.5”
  • Max folding angle: 135 degrees
$1,605.00
As low as $52/mo
View Details
Tin Knocker 20ga x 50” Finger Brake with Claw Foot Fingers HM MB 1300S at Elite Metal Tools
Tin Knocker 20ga x 50” Finger Brake with Claw Foot Fingers HM MB 1300S
  • Max bend length: 53”
  • Max Capacity: 20-gauge mild steel
  • Max opening: 2”
  • Max folding angle: 95 degrees
$2,035.00
As low as $66/mo
View Details
Tin Knocker 230V Single Phase The Wizard 5’x10’ HVAC Plasma System at Elite Metal Tools
Tin Knocker 230V Single Phase The Wizard 5’x10’ HVAC Plasma System
  • Load Capacity: 2,000 lb (full sheet of 1” plate)
  • Cutting Speed: 300ipm
  • Repeatability (approx.): ± 0.0005”
  • Power Supply: 230V Single Phase
$38,999.00
As low as $771/mo
View Details
Tin Knocker 400V Three Phase The Wizard 5’x10’ HVAC Plasma System at Elite Metal Tools
Tin Knocker 400V Three Phase The Wizard 5’x10’ HVAC Plasma System
  • Load Capacity: 2,000 lb (full sheet of 1” plate)
  • Cutting Speed: 300ipm
  • Repeatability (approx.): ± 0.0005”
  • Power Supply: 400V Three Phase
$38,999.00
As low as $771/mo
View Details
Tin Knocker 7" 24Ga. Combination Machine with 5 Pairs of Rolls TK 724 at Elite Metal Tools
Tin Knocker 7" 24Ga. Combination Machine with 5 Pairs of Rolls TK 724
  • Capacity: 24 Ga. Mild Steel
  • Throat: 7"
  • Throat: Pedestal Stand 
  • UPS Capable 
$1,249.00
As low as $40/mo
View Details
Tin Knocker 20ga x 50” Straight Brake with Claw Foot Nose Bar HM MB 1300H at Elite Metal Tools
Tin Knocker 20ga x 50” Straight Brake with Claw Foot Nose Bar HM MB 1300H
  • Actual max bend length: 53”
  • Max Capacity: 20-gauge mild steel
  • Max opening: 1.5”
  • Max folding angle: 135 degrees
$1,820.00
As low as $59/mo
View Details

Founded in 1998 and since then has been supplying companies with both new and used sheet metal machinery. Since opening they have become a trusted supplier in the sheet metal industry. They sell machines such as cleat benders, button locks, and slitters. 

If you are interested in cleat benders or anything else Tin Knocker has to offer, please contact us. Here at Elite Metal Tools we offer low prices and the best customer service,