Table Saws

  • Motor: 1-3/4 HP Single Phase
  • Arbor: 5/8”
  • Max Depth of Cut at 90 Degrees: 3”
  • Max Crosscut: 16”
  • Motor: 2 or 3 HP Single Phase
  • Max Depth of Cut at 90 Degrees: 3”
  • Max Crosscut: 13” Standard Arm
  • Dado Capacity: 2”
On Sale
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring D405M-10 at Elite Metal Tools
  • 5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
  • Motor: 2-1/2 HP Three Phase
  • Arbor: 5/8”
  • Max Crosscut: 16”
  • Dado Capacity: 13/16”
  • Motor: 5 HP or 7-1/2 HP Three Phase
  • Arbor: 1”
  • Max Rip: 32”
  • Max Crosscut: 18”
  • Motor: 3 HP or 5 HP Single Phase 230V
  • Arbor: 1”
  • Max Rip: 32”
  • Max Crosscut: 18”
  • 5 hp single phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°
  • Motor: 3 HP or 5 HP Single Phase
  • Arbor: 1”
  • Max Rip: 44”
  • Max Crosscut: 30”
  • 5 HP single phase main motor with 1 HP scoring motor
  • 51″ rip capacity
  • Sliding table dimensions: 10 ft. x 14”
  • Blade tilt: 0 – 45°
On Sale
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC at Elite Metal Tools
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
  • Motor: 3 HP or 5 HP Single Phase
  • Arbor: 1”
  • Max Rip: 38”
  • Max Crosscut: 24”
  • Motor: 2 or 3 HP Single Phase
  • Max Depth of Cut at 90 Degrees: 3”
  • Max Crosscut: 21" Long Arm
  • Dado Capacity: 2”
  • Sliding table dimension: 63” x 12.4”
  • 5 HP Single Phase main motor with ¾ HP scoring motor
  • Cutting width – ripping: 51” max
  • 0-45° Manual Tilting adjustment for main saw blade
On Sale
Cantek 7.5 HP Three Phase 10’ Sliding Table Saw with Scoring D405M-10 at Elite Metal Tools
  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
  • Motor: 7-1/2 HP Three Phase
  • Arbor: 1”
  • Max Rip: 32”
  • Max Depth of Cut at 90 Degrees: 6”
  • Maximum Length of Cut: 128"
  • Maximum Depth of Cut: 4"
  • Saw Blade Drive Motor: 10 HP
  • Table Height from Floor: 33"
  • Max. depth of cut at 90°: 5 1/2″
  • Max. depth of cut at 45°: 3 7/8″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
  • Maximum Length of Cut: 147"
  • Maximum Depth of Cut: 4"
  • Saw Blade Drive Motor: 10 HP
  • Table Height from Floor: 33"
  • Max. depth of cut at 90°: 5″
  • Max. depth of cut at 45°: 3 1/2″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
  • Motor: 7-1/2 HP Three Phase
  • Max Crosscut: 30”
  • Max Rip: 44”
  • Max Depth of Cut at 90 Degrees: 6”
  • Motor: 5 HP or 7-1/2 HP Three Phase
  • Arbor: 1”
  • Max Rip: 38”
  • Max Crosscut: 24”
On Sale
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC at Elite Metal Tools
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
  • Max. depth of cut at 90°: 4″
  • Max. depth of cut at 45°: 2 3/4″
  • Table size: 48″x30″
  • Electrics: 230/1/60
On Sale
Cantek 10’ Sliding Table with Powered Rise and Fall D405A at Elite Metal Tools
  • 7.5 HP main motor with 1HP scoring motor
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • Sliding table dimension: 126” x 15 ½”