Laguna Tools P12|10 5HP 220V Single Phase Panelsaw with 126” Sliding Table MPSP12-10-5HP-1PH-0135
Manufacturer Part: | EMT ID: |
MPSP12-10-5HP-1PH-0135
|
17845
|
- Sliding Table: 126″
- Rip Fence: 51″
- Main Blade Speed: 4000 RPM
- Motor: 5HP, 220V, Single Phase
Description
The 126″ sliding table is constructed of anodized aluminum. The dumbbell design is widely recognized as the superior choice for high-end sliders today. Ultra-smooth movement allows you to move the table effortlessly.
The European-style 51″ rip fence consists of a heavy-duty casting riding on a micro-polished solid steel bar. On the backside of the casting is a small adjustable wheel to make sideways movement a breeze. The rip fence is outfitted with a micro adjustment for fine-tuning; simply lock it in place and adjust fence incrementally.
The overhead guard comes standard with quick-change 90° and 45° guards; you can switch from one to the other in a matter of seconds. A nice detail is the swing-away function that allows you to quickly move the guard out of the way. Dust collection hookup is out of the way at the end of gantry (5″).
The heavy-duty anodized aluminum crosscut fence features two solid flip-stops, telescoping function (max 108″), 45° miter and is ergonomically designed to make it easier to read the tape.
Inside the P12|10 you will find the saw unit is moving on micro-polished solid steel rods for ultimate precision.
The heavy duty motor is equipped with soft start to minimize initial amperage draw.
The P12|10 comes standard with hold-down clamp, rip shoe and push handle.
Features
- Motor: 5 HP 1ph
- Voltage: 220v 60 HZ
- Blade Capacity: 12″, 14″/300mm, 355mm
- Max. Blade: 16″/400mm (minimum height when lowered: 1″/25mm)
- Max Scoring Blade: 4 3/4″ /120mm
- Scoring Adjustment: T-Handle through Cast Top
Specifications
- Arbor: 30mm(Main), 20mm (Scoring)
- Max Cutting Height 90° 14″/355mm Blade: 4 1/2″ (115mm)
- Max Cutting Height 90° 16″/400mm Blade: 5 1/8″ (130mm)
- Max Cutting Height 45° 14″/355mm Blade: 2 3/4″ (70mm)
- Max Cutting Height 45° 16″/400mm Blade: 3 1/2″ (90mm)
- Main Blade Speed: 4000 RPM
- Scoring Blade Speed: 8000 RPM
- Dust Collection Port Saw: 4 3/4″ (120mm)
- Dust Collection Port Guard: 4″ (100mm)
- Sliding Table: 126″ (3200mm)
- Sliding Table Width: 14.88″ (378mm)
- Main Cast Table: 21 1/2″ x 35 1/4″
- Rip Fence: 51″ (1300mm)
- Rip Fence Micro Adjust: Included
- Rip Fence Bar: 1 5/8″ (40mm) Solid Steel Micro Polished
- Overhead Guard with Swing-Away
- Push Handle: Included
- Rip Shoe: Included
- Hold Down Clamp: Included
- Crosscut Fence: 2 x Flip-Stops
- Crosscut Fence Readout: Inch/Metric
- Crosscut Fence Max Collapsed: 77″
- Crosscut Fence Max Extended: 140″
- Table Lock Positions: 2 Tabs, 20 Notches = 40 Total
- Ship Dimensions Body: 83″ x 47″ x 46″
- Ship Dimensions Table: 137″ x 20″ x 15″
- Weight (Net/Ship): 1815/2112 lbs
Manufacturer | |
SKU |
MPSP12-10-5HP-1PH-0135
|
Shipping Method |
LTL Freight
|
Weight |
2,112 lb
|
Dimensions |
83 × 47 × 46 in
|
Country of Origin |
Taiwan
|
Warranty |
2 Years
|
Warranty Details |
Must be registered with Laguna Tools within 30 days of purchase to be covered by this warranty.
|