BendPak 220V Single Phase 27,000 lbs. Standard Heavy Duty 4-Post Lift BEN HDS-27

Description

If you need a bigger, better four-post lift that can handle a 27,000-lb., Class 7 semi-truck, you need the HDS-27. Bigger sheaves and beefier components carry on BendPak’s legacy of dependability. If your shop services commercial and/or municipal vehicles, this lift is practically mandatory.

This is where BendPak’s car lifts really step into the next level of lifting. While the HDS-18E is an entry-level lift in the medium-duty truck category, the HDS-27 is well-suited to take your business well beyond the needs of most private drivers. This garage lift brings you into the realm of construction equipment, commercial flatbed trucks, concrete mixers, garbage trucks, buses, etc.

Every BendPak four-post lift, regardless of lift capacity, is made to exacting standards and gets the job done without undue strain or pain on the equipment. When BendPak rates a truck lift at 27,000 lbs., that means anything at or under that weight limit is a cinch for their lifts to handle. BendPak superbly over-engineer everything, so you can keep the “biggest and baddest” commercial and municipal vehicles up to code and ready for the next great haul.

• Extended Runways
  • Longer runways accommodate a wide variety of vehicle wheelbases, allowing you to steer massive trucks and buses onto BendPak’s ramps without damaging your vehicle chassis.
• Dual-Hub Cable Sheaves
  • BendPak takes the time, cost, and effort to bring you the best. Each sheave contained within the runway and cross tubes is a massive 12” in diameter, and the sheave axles, at 4” in diameter, greatly extend the lifespan of your lift by reducing the overall wear put on these parts. Manufacturing sheave components are even bigger than ones offered by BendPak’s competition, which ensures superior quality in our product. Additionally, BendPak parts always meet or exceed ALI standards for load bearing and safety.
• Heavy-Duty Aircraft Cable
  • Each of the four, 1/2” diameter, 6 x 25 galvanized lifting cables has a 14,000-lb. breaking strength, so a four-post lift as massive as this has the engineering to keep your vehicles safe at all times, especially during periods of heavy use. They won’t rust out or break apart due to bad weather, chemicals, or random, floating garage particulate.
• Built-In Lubrication
  • The sheaves and sheave axles are fitted with grease nipples to lubricate the parts as they move. This is an essential feature that is also a form of auto-maintenance, so you have little to do during your periodic service checks.
• Flow Restrictor
  • This truck lift provides the best that modern hydraulic technology has to offer. Integrated into the hydraulic cylinder is a flow restrictor that provides a safe, slow descent. This is true even in the extremely rare occurrence of a burst or ruptured hydraulic hose.
• Large Base Plates
  • Substantial 12" x 12" base plates support the massive columns.
• Spring-Loaded Safety Locks
  • When the HDS-27 truck lift rises, spring-loaded safety locks engage the moving platforms. Safety ladders are standard and can be adjusted to keep the runways level, which is especially useful for sloped floors.
• Push-Button Pneumatic Lock Release
  • The steel and aluminum pneumatic cylinders are aircraft-quality and certified to last for years without service. Lowering the lift release off the locks is done with one push against the pneumatic lock release. Just another simple way BendPak puts you in total control of your lift operations.
• Secondary Lock System
  • Two locks are better than one! A secondary slack-cable lock engages in case of cable failure, which is unlikely to occur. Still, BendPak prepares their heavy-duty lifts for the worst to keep you working at your best.
• Integrated Design
  • Tucked safely into the structure of the four-post lift columns, BendPak’s lifting cables, airlines, safety latches, and cable sheaves are kept away from inclement weather, hazardous chemical erosion, and garage dirt/debris. The column structure is the safest and most logical place to conceal the working parts of the lift. Internally routed parts are also crucial to creating the beautiful BendPak aesthetic BendPak’s customers have come to know and love!
• Adjustable Height Locking Positions
  • Four-post lifts accommodate many different vehicle types, so BendPak has made sure you can adjust the height to suit your needs and safely lock your vehicle in place.
• Electric-Hydraulic Power System
  • BendPak’s car lifts are designed with all operator buttons within reach, so you can raise, lower, or shut down the system at any time. One-push button controls make the whole process that much smoother.
• Flexible Protective Conduit
  • All of BendPak’s heavy-duty cables are fitted with a protective casing that is flexible and non-conducive to electricity. Your hoses will be intact and serviceable for many years without service, and the non-metallic tubing will ensure you’re never shocked by anything other than the great value of your purchase.
• Rolling Bridge Jacks
  • Bridge jacks raise the wheels above the runways, which lets operators perform wheel and brake service on the car. Since the HDS-27 Series supports some extremely heavy vehicles, the truck and SUV adapter set is a necessity for wheel/brake service on these lifts. Commercial-grade hydraulic pumps come standard and require 125 PSI and 10 – 20 CFM.
• Choose Extended Length
  • Some vehicles at the 27,000-lb. lift capacity begin to develop monstrous proportions. Garage trucks, for instance, are wide, tall and feature wide wheel bases. You need a car lift that can handle all those dimensions, plus the weight, without crapping out on you. The super-long HDS-27X may be the better option for your shop. Just be sure to discuss your service needs with a trained BendPak service representative if you need help deciding which 27K four-post lift is right for you.

Features

• 27,000-lb. lifting capacity
• CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
• Supersized 12" diameter cable sheaves
• Galvanized lifting cables
• Grease nipples
• Single hydraulic under-runway cylinder
• Integrated flow restrictor
• Durable powder coat
• Spring-loaded safety locks
• Second lock system on constant guard
• Fully enclosed lifting cables
• Multiple adjustable height locking positions
• Maintenance-free electric hydraulic power system
• Conveniently positioned operator controls
• 12" x 12" base plates
• Optional rolling jack
• Warranty
  • 5 Years on Lift Structure
  • 2 Years on Hydraulic Cylinder(s) and Power Unit
  • 1 Year on Operating Components
  • 1 Year on Electrical Components (Excluding Power Unit)
  • 1 Year on Labor

Specifications

• Capacity
  • Lifting Capacity: 27,000 lbs. (12,247 kg)
  • Max Capacity / Front Axle: 13,500 lbs. (6,123 kg)
  • Max Capacity / Rear Axle: 13,500 lbs. (6,123 kg)
• Rise
  • Min. Runway Height: 9.5" (241 mm)
  • Max. Rise: 61.25" (1,556 mm)
  • Max. Lifting Height: 69.5" (1,765 mm)
  • Time to Full Rise: 75 seconds
• Dimensions
  • Overall Width: 153.5" (3,899 mm)
  • Outside Length: 257" (6,528 mm)
  • Overall Length: 312.75" (7,944 mm)
  • Height of Columns: 91.25" (2,318 mm)
  • Width Between Columns: 133.5" (3,391 mm)
  • Drive-Thru Clearance: 109" (2,769 mm)
• Runways
  • Runway Width: 22" (559 mm)
  • Length of Runways: 257.5" (6,541 mm)
  • Width Between Runways: 40" (1,016 mm) or 45.25" (1,149 mm)
  • Runway Centerline: 62" (1,575 mm) or 67.5" (1,715 mm)
  • Outside Edge of Runways: 89.25" (2,267 mm) or 94.5" (2,400 mm)
• Minimum Wheelbase
  • Rated Capacity: 185" (4,699 mm)
  • 75% Capacity: 160" (4,064 mm)
  • 50% Capacity: 135" (3,429 mm)
  • 25% Capacity: 110" (2,794 mm)
• Locking
  • Locking Positions: 13
  • Lock Spacing: Every 4" / 100 mm
• Power Unit
  • Motor: 220 VAC / 60 Hz. 1Ph.
  • Noise: 45 dB
• Shipping
  • Weight: 6,109 lbs. (2,770 kg)
  • Dimensions: 266'' x 27'' x 35'' (6,756 mm x 685 mm x 889 mm)

Options

• 5150029 – LITESTIX™ LS36SMD: Lithium Rechargeable Underhood Work Light / 1,200 Lumens
• 5210438 – WSA-100: Air-Electric Workstation / Fits BendPak 2-Post & 4-Post Lifts
• 5150509 – Rolling Oil Drain Pan: 15 Gallon Rolling Drain Pan For 4-Post Lifts
• 5175349 – JP-6: 6,000-lb. Capacity / Telescoping Sliding Jack Platform
• 5175801 – Boat Trailer Platform: 3,000-lb. Capacity / Telescoping Boat Trailer Tongue Platform
• Rolling jacks